Absolutely…. Well built guitar…. They put the foam pads underneath the pups which I like. Keeps them from tilting like everyone has seen before. Someone had been inside it before though. Oddly no adjustment springs in the neck pup….and on the orange one there’s no springs on either pup. The single coil was only reading 5.6 but for some reason I couldn’t get a reading from the humbucker. There’s also no markings on them either….
You and DanTravis are my spiritual advisors….
Wayne was with me when I had nothing…. Look at me now-IMFASTASFUCKBOYEEEE!!!!
gut shots of the wiring ..... or all you did was screw them in ............
Map gas, coat hanger and aluminum welding rods…..occasional staple and hose clamps…. I feel the galvanized ones transfer the most crystal lettuce from the amp to the guitar…. Cause I wire my shit out of phase… I’m boosting my guitars….gut shots of the wiring ..... or all you did was screw them in ............
More like:
OK Dino ......Map gas, coat hanger and aluminum welding rods…..occasional staple and hose clamps…. I feel the galvanized ones transfer the most crystal lettuce from the amp to the guitar…. Cause I wire my shit out of phase… I’m boosting my guitars….
The amount of times i have changed all electronics in my guitars and had no sound, lol. Dont feel discouraged if it happens again.I just installed another set of pups in my band of gypsies showmaster courtesy of two of my bro’s…. A Duncan distortion humbucker that mailman Dan gave me and a yjm fury bridge that my other bro-jonnyguitar gave me. Got it the first time, no issues… no self electrocution either… that’s two guitars in two days…no problems or drama…
Thanks bro…. Honestly if I would just chill out and pay attention things would go alot smoother for me. I can get a little mean tempered at times also. I can’t believe I swapped out pups on two guitars and got it on the first shot, no issues on both…. Wayne and Larry better watch the fuck out…. Pups now… amps and pedals tomorrow….
No one understands a temper like me. Believe me
