Keeping it for now

[splawner]

I bought this a while back to build a project guitar and never got off the ground. It’s a Charvel style neck with Nickle jumbo frets and medium C thickness. It has a great birdeye finish. It is set up for a flyod Rose. Asking 350.00

• Qty: 1, Price: $215.00
• Construction Type:
  1 Piece Constructed
• Orientation:
  Right for Right Handed Players
• Scale Length:
  25.5" Standard Fender
• Number of Frets:
  22
• Nut Width:
  1-11/16" (42.8mm)
• Nut Slot Style:
  Floyd Nut Shelf Only
• Heel Width and Type:
  2-1/4" (57.2mm) Rounded Strat
• Truss Rod Type:
  Dual Acting w/ Modern Nut adjust @ Heel
• Shaft Wood:
  Birdseye Grade 5A ($250.00)
• Fingerboard Radius:
  Compound 10" to 16" ($40.00)
• Fingerboard Edge Style:
  Heavy Rolled Fingerboard Edges ($40.00)
• Tuner Hole Size:
  10mm (Modern Style Keys)
• Top Inlay Type:
  1/4" Dots (Black)
• Side Markers:
  Black 3/32" (Larger)
• 12th Dot Spacing:
  Narrow (Modern Style Post 1964)
• Fret Size and Type:
  7100 Stainless (Jumbo) ($60.00)
• Skunk Stripe Option 1pc:
  Walnut w/ Walnut Plug
• Back Profile Shape and Size:
  C 83 92
• Binding:
  None
• Tuner Install:
  NONE
• Headstock Veneer:
  NONE
• Nut Installation:
  NONE
• Nut String Spacing:
  Not Applicable
• Finish:
  Aged Oil (Best on Figured Woods) ($60.00)
• Neck Mounting Holes:
  Drill Neck Mounting Holes
• Administrative Up-Charges:
  None
• Order Change Acknowledgement:
  I have read the order change policy
• Delivery Confirmation:
  No Signature required upon delivery
• Comments:
  Phone order by Scott Based on specs from Sample neck sent in to MK (with a few changes). Return sample neck with this order. See Scott for birdseye shaftwood selection

Reply
Report Edit

 

[LAVALLE]

Hi do you have the exact specs?

 

[splawner]

Hi do you have the exact specs?

I’m sorry I don’t. I tried looking for the E-mail but don’t have it. I did send a Charvel neck out to them to copy from. I just had it made to a medium C which is a bit fatter than mine was.

 

[LAVALLE]

Ok. If you come across the specs please let me know.

 

[splawner]

Ok. If you come across the specs please let me know.

Will do

 

[Matt300ZXT]

You think that'll fit a Strat pocket? I've got a Superstrat I've been thinking of upgrading the neck on.

 

[splawner]

• Qty: 1, Price: $215.00
• Construction Type:
  1 Piece Constructed
• Orientation:
  Right for Right Handed Players
• Scale Length:
  25.5" Standard Fender
• Number of Frets:
  22
• Nut Width:
  1-11/16" (42.8mm)
• Nut Slot Style:
  Floyd Nut Shelf Only
• Heel Width and Type:
  2-1/4" (57.2mm) Rounded Strat
• Truss Rod Type:
  Dual Acting w/ Modern Nut adjust @ Heel
• Shaft Wood:
  Birdseye Grade 5A ($250.00)
• Fingerboard Radius:
  Compound 10" to 16" ($40.00)
• Fingerboard Edge Style:
  Heavy Rolled Fingerboard Edges ($40.00)
• Tuner Hole Size:
  10mm (Modern Style Keys)
• Top Inlay Type:
  1/4" Dots (Black)
• Side Markers:
  Black 3/32" (Larger)
• 12th Dot Spacing:
  Narrow (Modern Style Post 1964)
• Fret Size and Type:
  7100 Stainless (Jumbo) ($60.00)
• Skunk Stripe Option 1pc:
  Walnut w/ Walnut Plug
• Back Profile Shape and Size:
  C 83 92
• Binding:
  None
• Tuner Install:
  NONE
• Headstock Veneer:
  NONE
• Nut Installation:
  NONE
• Nut String Spacing:
  Not Applicable
• Finish:
  Aged Oil (Best on Figured Woods) ($60.00)
• Neck Mounting Holes:
  Drill Neck Mounting Holes
• Administrative Up-Charges:
  None
• Order Change Acknowledgement:
  I have read the order change policy
• Delivery Confirmation:
  No Signature required upon delivery
• Comments:
  Phone order by Scott Based on specs from Sample neck sent in to MK (with a few changes). Return sample neck with this order. See Scott for birdseye shaftwood selection

Reply
Report Edit

 

[splawner]

You think that'll fit a Strat pocket? I've got a Superstrat I've been thinking of upgrading the neck on.

Specs are posted

 

[splawner]

Bump

 

[Aynirar27]

Sexy

 

[PDC]

You think that'll fit a Strat pocket? I've got a Superstrat I've been thinking of upgrading the neck on.

2-1/4” Charvel Style Heel would not fit a 2-3/16” Fender/Strat size neck pocket without quite a bit of relief to the pocket. You sure wouldn’t want to start shaving the sides of the heel on a neck this nice to make it fit a narrow pocket. And if you did open up the pocket on a Fender style body, you couldn’t reasonably go back to a std Fender neck without a decent air gap on both sides of the pocket.

I’m super, super tempted by this. This is a very special neck, and I’ve got a Musikraft body with a 2-1/4 neck pocket…. God this thing is nice.