Kemper guys...reamping?

  • Thread starter Thread starter SkyhighRocks
  • Start date Start date
SkyhighRocks":kntcbmnp said:
stratotone":kntcbmnp said:
I got it to work on mine. Couple of things I had to do:

1) click the input button on the kemper, and make sure spdif input is checked.
2) on my reamp track I had to click on the I/O and added a new hardward OUTPUT to digital L/R (for stereo)
3) made a new track in reaper and the INPUT on it was set to digital L/R

Arm the new track in reaper for recording, MUTE the other tracks or SOLO the reamp track, and be sure that record monitoring isn't on. You should see activity on your recording window (where it shows the waveforms). I couldn't monitor in real time because my SPDIF device isn't what my monitoring system is hooked up to. But I could do it analog just as easily by routing manually what was set up digitally above.

Pete
Click to expand...

This is pretty much what I've done with no luck except instead of digital L/R, mine says spoof L/R. I'll have to try again tomorrow.
Click to expand...

Unfortunately I think anything past this is going to be with your audio interface. Have you ever used the SPDIF in/out on it?
 
I managed to get it working thanks to the kemper forum. Now my issue is a pretty bad hiss when trying to reamp the dry signal. Using the noise gate does nothing.... :confused:
 
Hit one of the ground buttons on of the other outputs you may be using.
 
tfridgen":g70gcw6m said:
Hit one of the ground buttons on of the other outputs you may be using.
Click to expand...

Figured it out...I had spdif set to stack...which didn't let the profile's gate through to the recording. I don't have anything else connected to use the grounds...
 
thanks for your help last night! Hopefully I can get this jiving with my album.
 
SkyhighRocks":2ultvqhj said:
thanks for your help last night! Hopefully I can get this jiving with my album.
Click to expand...

No prob! Can't wait to hear some more of it!
 
You must log in or register to reply here.
Back
Top