AndyK
Well-known member
Vogel hand wired Plexi clone, impeccable build with the following:
All premium parts:
Metroamp chassis
EHX 6CA7 power tubes
Heyboer Transformers
CTS pots
Synergy Royal Mustard signal capacitors
F&T filter caps
Cliffs Jack
Belton sockets
Has switches that allow any combination:
shared/split cathode V1
V2A .68 cathode bypass cap on/off
early/ late tone stack switch (250pF-56k slope or 500pF-33k slope)
push pull pot on volume 1 for 500pf or 2700pf bright cap choice
low or high filtering switch on the power tube plates
These added features give you the the ability to combine elements from Marshall amps made between late 1967-the early 1970's!
This is a classic Plexi sound, and can be "modded" with a flick of the switches. I also have the back panel - forgot to take a photo of it.
https://www.youtube.com/watch?v=Nznw6Bf-54E&t=114s
All premium parts:
Metroamp chassis
EHX 6CA7 power tubes
Heyboer Transformers
CTS pots
Synergy Royal Mustard signal capacitors
F&T filter caps
Cliffs Jack
Belton sockets
Has switches that allow any combination:
shared/split cathode V1
V2A .68 cathode bypass cap on/off
early/ late tone stack switch (250pF-56k slope or 500pF-33k slope)
push pull pot on volume 1 for 500pf or 2700pf bright cap choice
low or high filtering switch on the power tube plates
These added features give you the the ability to combine elements from Marshall amps made between late 1967-the early 1970's!
This is a classic Plexi sound, and can be "modded" with a flick of the switches. I also have the back panel - forgot to take a photo of it.
https://www.youtube.com/watch?v=Nznw6Bf-54E&t=114s