Fretburner
Active member
SOLD Killer MGL 50 High gain model, in the vein of an early 2204 but with more balls! Serial #4. All hand wired point to point. I’ll split the shipping cost with the buyer. No trades.
BUILD SPECS:
* .090" aluminum chassis w/ welded and ground corners
* Custom wound power transformer and choke from Dagnall in the UK
* Handwound Merren Audio output transformer
* 2 of the caps early in the circuit are NOS mustard caps and really add to the “Marshall” voicing
* Mostly SoZo caps in the rest of the circuit
* NOS Amphenol power tube sockets
* Belton preamp tube sockets w/ gold anodized shields
* 18 AWG mil spec Teflon insulated wire
* 1 watt carbon film resistors
* Real UK Cliff jacks
* Brass shaft CTS pots
* ARS filter caps
* Metropoulos “Zero Loss” effects loop w/ true bypass switch
* NOS tube set with German Siemens EL34 power tubes & original ‘80’s Chinese mil spec 12AX7 preamp tubes
BUILD SPECS:
* .090" aluminum chassis w/ welded and ground corners
* Custom wound power transformer and choke from Dagnall in the UK
* Handwound Merren Audio output transformer
* 2 of the caps early in the circuit are NOS mustard caps and really add to the “Marshall” voicing
* Mostly SoZo caps in the rest of the circuit
* NOS Amphenol power tube sockets
* Belton preamp tube sockets w/ gold anodized shields
* 18 AWG mil spec Teflon insulated wire
* 1 watt carbon film resistors
* Real UK Cliff jacks
* Brass shaft CTS pots
* ARS filter caps
* Metropoulos “Zero Loss” effects loop w/ true bypass switch
* NOS tube set with German Siemens EL34 power tubes & original ‘80’s Chinese mil spec 12AX7 preamp tubes
Attachments
Last edited: