Midi Moose Users

[jake5150]

Hi guys, tried finding an answer for this everywhere but can't seem to get an answer.

When I run my Midi Moose with a battery, is there a way to turn it off? The Led stays on constantly and I can't find a way to turn it off other than removing the battery (hugely inconvenient when it's attached to a pedal board!)

Thanks!

 

[Chris O]

Is there a chord in it? If yes, pull the chord. Works with regular pedals, so maybe with this too?

 

[jake5150]

No cord plugged in. Only a battery. I'm using it with an amp that annoyingly doesn't power it via Midi.

 

[dooredge]

Not sure if this helps, but this blurb is on the Tech21 site.

Like its MIDI Mouse cousin, the MIDI Moose is also battery operable and provides a minimum of 200 hours usage. Its sophisticated battery-saving feature turns off the numerical display after 5 seconds. What if you forget where you were? Just hit the footswitch of the individual patch LED that has remained lit, and it will wake up the display without making any program changes.

Also, if you're using the Midi Moose midi cable with your amp, phantom power should power the Moose and no need for a battery. Sounds like you may have a bumb midi cable?