NAD! Peavey 6505+ Head

  • Thread starter Thread starter Charvel1975
  • Start date Start date
Lord Toneking":2sncuiry said:
Charvel1975":2sncuiry said:
I forgot to mention I have a Boss NS-2 noise gate pedal that I tried running thru both the front end of the amp and thru the effects loop but that didn't help at all?
Click to expand...
Call peavey and talk with one of their techs. I used to have the guys name and extention, he was VERY helpful with me. He spent at least 45mins on the phone with me going over everything!

Be very specific with him and I bet he can help you. Could be just a bad connection from one of the ribbon cable inside. Did you take the chassis out of the headshell and do a visual inspection??
Click to expand...


No I haven't taken the chassis out yet, was just trying to put the back mesh power tube cover on and peavey sent me 6 screws with the washers already on the screws and the screws wouldn't screw in all the way? There's only 4 holes for the rear power tube cover, peavey didn't give me the screws for the preamp tubes cover plate, thats what I thought those 6 screws were for but they're too big around
 
You must log in or register to reply here.
Back
Top