Need help with adding a Rane sm26 mixer to my Wet dry Wet rig.

[bmf5150]

Hey guys ,i need help .Im adding a Rane sm26 mixer to my wet dry wet rig .Im doing the EVH wet dry wet rig with a palmer pdi 09 ,the Eventide H3000,and two Roland sde 3000 delays .im posting a crappy drawing on how i think the mixer is wired along with the effects,is this the correct routing?Thank you for any advice!

 

[Dave L]

Unless you want the delays in parallel with the detune that´s not right. The Rolands have their own analog dry path, so they´re typically between the Rane and the power amp. Also, each channel on the Rane can be either an in or an out, so my preferred routing here would be as follows:

Mono from Palmer to Rane Master input left
Two monos from Rane Mono out 1 and Mono out 2 (both with the little pan knob set all the way to left) to Eventide left and right inputs
Eventide outputs to Rane Mono in 3 and Mono in 4 (panned hard left and right)
Rane main outputs to the Roland delays

 

[bmf5150]

Ok my original drawing will not work i realize .will this work

 

[bmf5150]

Unless you want the delays in parallel with the detune that´s not right. The Rolands have their own analog dry path, so they´re typically between the Rane and the power amp. Also, each channel on the Rane can be either an in or an out, so my preferred routing here would be as follows:

Mono from Palmer to Rane Master input left
Two monos from Rane Mono out 1 and Mono out 2 (both with the little pan knob set all the way to left) to Eventide left and right inputs
Eventide outputs to Rane Mono in 3 and Mono in 4 (panned hard left and right)
Rane main outputs to the Roland delays

Thank you !