Brandon Breeze
Active member
This is an awesome/beautiful guitar built right here in my hometown by an extremely talented guy. Quarter Sawn Mahogany Body with an awesome bookend matched tiger maple cap, ebony fret board, abalone inlays, quarter sawn mahogany 3 piece neck with maple stripe and volute, ebony veneer on the back of the head stock, stained black flamed maple veneer on the front of the head stock, medium frets, Grover tuners, push/pull tone pot does splitting or phase depending on pickup selector position. Ken Armstrong pickups.
From what I've heard Thus builder has only made roughly 120 guitars, ever, so these are not something you'll see many of. This guitar is 1 of 3 like it and has the most depth out of the 3. This is production #103 and his last electric build.
Gary built a guitar for Arnold Schwarzenegger to give to Tony Blair!
His guitars are hand built one offs, no production line, everything hand fit meticulously, almost everything made in house in his small work shop. This guy makes seriously beautiful guitars. Check out that acoustic! I'm not one for acoustic guitars, but may have to pick this one up as well! Also hand built.
Some clean sounds:
Some distortions sounds on my Uberschall:
Here's a video detailing the guitars specs:
The acoustic! Not buying this one(yet) from what I recall the body, sides, and neck are all mahogany(yes mahogany, not flamed maple)spruce top, maple binding, with a very thin line of ebony binding right under that. Walnut veneer on the back of the head stock, bone nut/bridge/string keepers, Grover tuners, ebony veneer on the front of the headstock, hand cut abalone inlays, ebony fret board, and truss rod adjustable from the head stock. Absolutely amazing!
From what I've heard Thus builder has only made roughly 120 guitars, ever, so these are not something you'll see many of. This guitar is 1 of 3 like it and has the most depth out of the 3. This is production #103 and his last electric build.
Gary built a guitar for Arnold Schwarzenegger to give to Tony Blair!
His guitars are hand built one offs, no production line, everything hand fit meticulously, almost everything made in house in his small work shop. This guy makes seriously beautiful guitars. Check out that acoustic! I'm not one for acoustic guitars, but may have to pick this one up as well! Also hand built.
Some clean sounds:
Some distortions sounds on my Uberschall:
Here's a video detailing the guitars specs:
The acoustic! Not buying this one(yet) from what I recall the body, sides, and neck are all mahogany(yes mahogany, not flamed maple)spruce top, maple binding, with a very thin line of ebony binding right under that. Walnut veneer on the back of the head stock, bone nut/bridge/string keepers, Grover tuners, ebony veneer on the front of the headstock, hand cut abalone inlays, ebony fret board, and truss rod adjustable from the head stock. Absolutely amazing!
