scottosan
Well-known member
Got the Browne Protein. The Green side is a refined Nobles ODR1 circuit and the blue side is a blues breaker type, but more balanced than the King of Tone (KoT). I actually like the blue side better than the klon for the always on setting as it seems to be more transparent and more low end. While the green side isn’t my favor alone, stacked with the blue sounds really huge.
I have a Temple Audio board with quick release mounts. The stock adhesive is horribly difficult to remove and not recommended to attach to the pedal.
While a little pricey, I use Patco 5560 Adhesive removable film. You may be able to find smaller rolls, not sure.
Patco 5560/CLR336 5560 Removable Protective Film Tape: 3" x 36 yd, Clear
https://www.amazon.com/dp/B0041PKJL...abc_XPGJVQYT4H5QDA42SA2S?_encoding=UTF8&psc=1
It is very much like the clear film on cars. I use a piece than is a bit larger than the adhesive or Velcro that I would typically apply. The PATCO is secure but you don’t want to pull on the corners that the larger piece than needed.
I have a Temple Audio board with quick release mounts. The stock adhesive is horribly difficult to remove and not recommended to attach to the pedal.
While a little pricey, I use Patco 5560 Adhesive removable film. You may be able to find smaller rolls, not sure.
Patco 5560/CLR336 5560 Removable Protective Film Tape: 3" x 36 yd, Clear
https://www.amazon.com/dp/B0041PKJL...abc_XPGJVQYT4H5QDA42SA2S?_encoding=UTF8&psc=1
It is very much like the clear film on cars. I use a piece than is a bit larger than the adhesive or Velcro that I would typically apply. The PATCO is secure but you don’t want to pull on the corners that the larger piece than needed.
