R
raylewispitt
New member
Hi All,
I'm thinking of selling my complete sound system, club lighting rig, and mobile recording rigs and wanted to see if anyone here might be interested. Some of the stuff is brand new with warranties. I have invested over $35,000 into this equipment over the last year or so, but recently lost my job and was hoping I'd get my company up and running before my unemployment ran out. I'm out of UC now and on the verge of losing my house. This is a complete sound/lighting/mobile recording company and is 100% up and running, including a 16' box truck. If you are interested, I may also be able to deliver everything to you (depending on where you are, of course), and also spend a couple days going over the rig, setup, and questions you may have. Below is a list of the main equipment. I also have some pictures that I couldn't upload here because of the size. You can see the pictures on my FB site, search for raylewispitt and look in my photos folder. I will also throw in everything else I haven for the rigs, which just includes stuff like connectors, a few tools, and a few supplies like gaff tape, console tape/ input tails, etc. Here is a list of the equipment included in the rig:
PA Speakers
-2 Jbl PRX 418 subwoofers
-2 Jbl PRX 425 mains
-6 JBL JRX 125 floor wedge monitors
PA amplifiers and racks
-4 Crown XTI 2000
-2 Crown XTI 4000
-2 8-space power amp racks
-4 30A power strips
-2 Rack panels with connectors
--2 custom rack wiring systems
Front Of House (FOH)
-2 presonus 16.4.2 mixers
-2 Odyssey 16 space mixer racks with side tables
-2 Rack power strips
-1 Behringer headphone amp
-1 4-space rack drawer
-1 Rack mount PC
---Intel i7 processor
---Intel PCI RAID controller
---16GB ram and 3 1.5 TB drives
---firewire interface for mixers
---wireless KB and mouse
---4 ASUS 20” flat panel monitors
Blu-ray burner
-2 custom made rack panels
---EDAC and MIDI connectors
-2 Custom monitor cases for a pair of PC monitors
-4-space rack mount drawers
-AKG K240 headphones
Microphones
-2 Shure Beta 52 microphones
-4 Shure Beta 98S microphones
-5 Shure SM57 microphones
-6 Shure SM58 microphones
-2 Shure SM81 microphones
-2 Studio Projects B3 microphones
-Audio Technica 4033SM microphone
-Peavey PVM480 microphone
Studio recording
-2 Event 20/20 BAS studio monitors
---with custom made cases
-4 Shure SRH440 Studio headphones
-Cubase 6.5 studio recording software
-Steinberg Wavelab 7 mastering software
-2 tripod speaker stands
---for studio monitors,with stand adapters
Cabling and microphone accessories
-32 X 8 snake (60ft)
---EDAC connection at FOH
-32 X 8 extension cable
---EDAC connectors on both ends
-16 ch splitter snake, 30 ft and 15 ft tails
-16 ch snake extension cable
---EDAC connectors on both ends
-36 Microphone cables
---Varying lengths
-10 Speaker cables (25ft), for monitors
-2 Speaker cables (25ft), 12-gauge for mains
-2 Speaker cables (75ft), 12-gauge, for mains
-14 Microphone clips of varying styles
-4 Drum mounts for Beta 98 microphones
-3 Drum mounts for standard microphone clips
-Dual microphone clip adapter for OH microphones
-16 Microphone stands, 12 std boom, 4 short boom
Lighting
-24 Chauvet SlimPar 64 LED fixtures
-3 Chauvet 4Play pin spots
-2 Chauvet Geyser fog machines
-4 ADJ Quad Scan Pro scanners
-4 ADJ Freq5 strobe lights
-2 ADJ Galaxian 3D lasers
-2 Global truss ST90 stands
-2 Global truss “T” adapters
-4 ADJ LTS1 stands
-14' upstage truss (more light-duty truss is also available)
-Custom wiring harness
-Elation Magic 260 DMX controller
-Chauvet Stage designer 50 DMX controller
-4 DMX cables (50ft)
-2 DMX cables (25ft)
-24 DMX cables (5ft)
-Backdrop, black, 15' X 12'
Transport
-Ford E350 box truck, 1996, 7.8L turbo diesel
---16 ft box
---loading ramp
---tie-down track
-Dolly, aluminum, convertible
-3 large plastic heavy duty carrying totes
-6 small plastic heavy duty carrying totes
Let me know if you are interested, or need more information
Thanks,
Ray
I'm thinking of selling my complete sound system, club lighting rig, and mobile recording rigs and wanted to see if anyone here might be interested. Some of the stuff is brand new with warranties. I have invested over $35,000 into this equipment over the last year or so, but recently lost my job and was hoping I'd get my company up and running before my unemployment ran out. I'm out of UC now and on the verge of losing my house. This is a complete sound/lighting/mobile recording company and is 100% up and running, including a 16' box truck. If you are interested, I may also be able to deliver everything to you (depending on where you are, of course), and also spend a couple days going over the rig, setup, and questions you may have. Below is a list of the main equipment. I also have some pictures that I couldn't upload here because of the size. You can see the pictures on my FB site, search for raylewispitt and look in my photos folder. I will also throw in everything else I haven for the rigs, which just includes stuff like connectors, a few tools, and a few supplies like gaff tape, console tape/ input tails, etc. Here is a list of the equipment included in the rig:
PA Speakers
-2 Jbl PRX 418 subwoofers
-2 Jbl PRX 425 mains
-6 JBL JRX 125 floor wedge monitors
PA amplifiers and racks
-4 Crown XTI 2000
-2 Crown XTI 4000
-2 8-space power amp racks
-4 30A power strips
-2 Rack panels with connectors
--2 custom rack wiring systems
Front Of House (FOH)
-2 presonus 16.4.2 mixers
-2 Odyssey 16 space mixer racks with side tables
-2 Rack power strips
-1 Behringer headphone amp
-1 4-space rack drawer
-1 Rack mount PC
---Intel i7 processor
---Intel PCI RAID controller
---16GB ram and 3 1.5 TB drives
---firewire interface for mixers
---wireless KB and mouse
---4 ASUS 20” flat panel monitors
Blu-ray burner
-2 custom made rack panels
---EDAC and MIDI connectors
-2 Custom monitor cases for a pair of PC monitors
-4-space rack mount drawers
-AKG K240 headphones
Microphones
-2 Shure Beta 52 microphones
-4 Shure Beta 98S microphones
-5 Shure SM57 microphones
-6 Shure SM58 microphones
-2 Shure SM81 microphones
-2 Studio Projects B3 microphones
-Audio Technica 4033SM microphone
-Peavey PVM480 microphone
Studio recording
-2 Event 20/20 BAS studio monitors
---with custom made cases
-4 Shure SRH440 Studio headphones
-Cubase 6.5 studio recording software
-Steinberg Wavelab 7 mastering software
-2 tripod speaker stands
---for studio monitors,with stand adapters
Cabling and microphone accessories
-32 X 8 snake (60ft)
---EDAC connection at FOH
-32 X 8 extension cable
---EDAC connectors on both ends
-16 ch splitter snake, 30 ft and 15 ft tails
-16 ch snake extension cable
---EDAC connectors on both ends
-36 Microphone cables
---Varying lengths
-10 Speaker cables (25ft), for monitors
-2 Speaker cables (25ft), 12-gauge for mains
-2 Speaker cables (75ft), 12-gauge, for mains
-14 Microphone clips of varying styles
-4 Drum mounts for Beta 98 microphones
-3 Drum mounts for standard microphone clips
-Dual microphone clip adapter for OH microphones
-16 Microphone stands, 12 std boom, 4 short boom
Lighting
-24 Chauvet SlimPar 64 LED fixtures
-3 Chauvet 4Play pin spots
-2 Chauvet Geyser fog machines
-4 ADJ Quad Scan Pro scanners
-4 ADJ Freq5 strobe lights
-2 ADJ Galaxian 3D lasers
-2 Global truss ST90 stands
-2 Global truss “T” adapters
-4 ADJ LTS1 stands
-14' upstage truss (more light-duty truss is also available)
-Custom wiring harness
-Elation Magic 260 DMX controller
-Chauvet Stage designer 50 DMX controller
-4 DMX cables (50ft)
-2 DMX cables (25ft)
-24 DMX cables (5ft)
-Backdrop, black, 15' X 12'
Transport
-Ford E350 box truck, 1996, 7.8L turbo diesel
---16 ft box
---loading ramp
---tie-down track
-Dolly, aluminum, convertible
-3 large plastic heavy duty carrying totes
-6 small plastic heavy duty carrying totes
Let me know if you are interested, or need more information
Thanks,
Ray
