P
peckhart
Active member
I had an '09 Quick Rod and matching 4x12 w/SBs for about 3 years. Played lots of gigs with it and it was a really great amp for the music we did.
From the moment I got it I knew it was different than any amp I had owned (5150s, Tremoverb, Dual Rec, Laney VH100R, H&K Triamp, Marshall DSL and VM). The clarity and power each note had was stunning and it really had a great aggressive grind to it. Punchy and tight and I personally didn't have any issue with its tight feel (ie never felt too stiff to me).
When I stopped gigging I stopped using it and took a break from playing for a bit. Getting back into it I didn't see a need for a half stack and started to want something different. A few things about the Splawn...cleans just aren't that great. For me, I just found Gear 2 to be the amps best sound and feel and I felt like the gain and EQ kind of had a narrow range of great tone. In other words, I found it lacking in versatility. Not saying its totally a one trick pony I would venture to say other people could probably get more out of it...just what I found for my taste. I also felt playing leads on it was sometimes tough. Perhaps that was the stiffness of the amp, but it seemed the higher notes just weren't as fat as I would like. Also, I would agree with what some others observe in that the high end and brightness of the amp could get kind of fatiguing on the ears after a while. EQing that high end out took off some of the mojo to me though...hence that narrow spot where it sounded right.
I want to break out of straight up rock all the time and want an amp that can cover modern rock, classic rock, blues, jam band type stuff. Tried out a Mesa Lonestar, but its just not the amount of gain and voicing I like to have on board.
So now I just got a Mesa Roadster. My past experience with a Tremoverb I guess brought me back to the Boogies and the Roadster seemed like a good modern match to the vibe the Tverb had plus a wider range of useable tones. I knew the Tverb didn't have that really refined powerful sound the QR did, but it did always sound good and I liked it in a band setting.
I have barely scratched the surface with the Roadster and I think its got some good stuff going on, but I can't help but wonder if I'll ultimately miss that special thing the QR had and just not be able to get that clarity and high quality crunchy aggressive gain w/out any flub or fizzyness going on.
I am not looking to make the Mesa sound like the QR as I expect a different voicing. Hard to put it in words but my immediate comparison is just that the QR is just a step up in quality. And it was there from the moment I first plugged in...the Roadster I think will take some tube swapping and possibly a bias mod.
Overall the Roadster is a cool and very versatile amp so I am going to work at it and try to jam with some people to see how it does in the mix.
That was a long way to get to a question I have for others that have owned a Quick Rod. Where did you go from there? Did you move to something you found better? Or just different? Whats doing it for you now?
From the moment I got it I knew it was different than any amp I had owned (5150s, Tremoverb, Dual Rec, Laney VH100R, H&K Triamp, Marshall DSL and VM). The clarity and power each note had was stunning and it really had a great aggressive grind to it. Punchy and tight and I personally didn't have any issue with its tight feel (ie never felt too stiff to me).
When I stopped gigging I stopped using it and took a break from playing for a bit. Getting back into it I didn't see a need for a half stack and started to want something different. A few things about the Splawn...cleans just aren't that great. For me, I just found Gear 2 to be the amps best sound and feel and I felt like the gain and EQ kind of had a narrow range of great tone. In other words, I found it lacking in versatility. Not saying its totally a one trick pony I would venture to say other people could probably get more out of it...just what I found for my taste. I also felt playing leads on it was sometimes tough. Perhaps that was the stiffness of the amp, but it seemed the higher notes just weren't as fat as I would like. Also, I would agree with what some others observe in that the high end and brightness of the amp could get kind of fatiguing on the ears after a while. EQing that high end out took off some of the mojo to me though...hence that narrow spot where it sounded right.
I want to break out of straight up rock all the time and want an amp that can cover modern rock, classic rock, blues, jam band type stuff. Tried out a Mesa Lonestar, but its just not the amount of gain and voicing I like to have on board.
So now I just got a Mesa Roadster. My past experience with a Tremoverb I guess brought me back to the Boogies and the Roadster seemed like a good modern match to the vibe the Tverb had plus a wider range of useable tones. I knew the Tverb didn't have that really refined powerful sound the QR did, but it did always sound good and I liked it in a band setting.
I have barely scratched the surface with the Roadster and I think its got some good stuff going on, but I can't help but wonder if I'll ultimately miss that special thing the QR had and just not be able to get that clarity and high quality crunchy aggressive gain w/out any flub or fizzyness going on.
I am not looking to make the Mesa sound like the QR as I expect a different voicing. Hard to put it in words but my immediate comparison is just that the QR is just a step up in quality. And it was there from the moment I first plugged in...the Roadster I think will take some tube swapping and possibly a bias mod.
Overall the Roadster is a cool and very versatile amp so I am going to work at it and try to jam with some people to see how it does in the mix.
That was a long way to get to a question I have for others that have owned a Quick Rod. Where did you go from there? Did you move to something you found better? Or just different? Whats doing it for you now?