Pedal board help

  • Thread starter Thread starter chawonkey
  • Start date Start date
C

chawonkey

New member
I hope someone can help give me some advice, I am putting a pedal board together for my brown eye amp. I have most of the effects figured out as far as which ones I want to use. The 2 questions I have are which pedal power supply would work best for me and which pedal switcher/router would be best for me? My chain is as follows Barber compressor/area 51 wah/stomp under foot civil war muff/VFE darkhorse/empress para eq. These are going into the front of the amp. Then in the fx loop Small clone chorus/t rex Reverb/empress delay So as far as pedal power supply the dunlop mxr cae mc-403 is what I have been looking into. Is it a good quality unit? As far as a pedal switcher/router I have been looking into the musicom efx mk III. It looks like it has enough loops and could also be a channel switcher all in one for my brown eye amp going from clean to be and hbe. The only question I have is it possible to run my fx loop into this as well. :confused: Being able to go from stock brown eye to hairy brown eye with compression/delay etc. in the push of a button is what I'm going for. Thanks for any advice anyone may have :thumbsup:
 
The musicom will work for the loop stuff and the front stuff. You will have to put your wah first though and then the other 4 in the first for loops. Then you have the other 4 for loop stuff. There is also 4 channel switching functions. The the cae power supply will work for this.
 
You must log in or register to reply here.
Back
Top