G
guidedbyechoes
Member
I've recently been looking into options to that make life easier in general with switching effects and such. There's a ton of options but, I'm having issues finding something specific. I have two amps I want to run in stereo. A Mako Mak4/Fryette Powerstation combo and a VHT Pitbull Fifty/CL. I plan to run two boosts out front and up to 5 devices in the loop. It's easy enough to find midi switching for the VHT to control its 4 footswitch functions. The issue is the MAK 4. To switch it you need either one cat 5 cable (my usual operation) or 4 momentary switches to operate all of the functions of the pedal. I've included a picture for reference. https://reverb-res.cloudinary.com/i...90,w_620/v1415039512/vvdlqhci47alfcyiug8m.jpg
The biggest issue is even if I don't go for the stereo approach there is tap dancing when using the mak4 with out board effects. It also is the device that is the tone in my head. Mako is basically out of business, as far as I can tell, so I don't see any upgraded units coming out in the foreseeable future. I figured I'd post here since it seems like a more high tech forum than most. Any help would be greatly appreciated.
The biggest issue is even if I don't go for the stereo approach there is tap dancing when using the mak4 with out board effects. It also is the device that is the tone in my head. Mako is basically out of business, as far as I can tell, so I don't see any upgraded units coming out in the foreseeable future. I figured I'd post here since it seems like a more high tech forum than most. Any help would be greatly appreciated.
