Rebel 30 and Marshal cab

  • Thread starter Thread starter adicreed
  • Start date Start date
A

adicreed

New member
Hey so I have a stupid question for you guys. I have a Marshall half stack and there's 2 inputs on the back, do I need to plug the Rebel into both of them? one on the main and one on the extension. I ask because I just have it plugged in on one at the moment and it seems like only half the speakers are on, but I could be wrong. Thanks for the help :)
 
So it's a 412?? What do the input jacks say?? I would NOT plug one in each one from the same amp. Most likely it's just a parallel out to run another cab. If you do that, you'll be sending power back to the amp. Not good.

But, if there are only two speakers working, you need to open the back and check your wiring. Something may have come loose.
 
I've semi figured it out...I had a triple rectifier that I would plug 2 1/4" cables into the cab, and realized there was a mono and stereo switch on there. If I plug in one 1/4" then I need to have it on mono, but if I plug two 1/4" in then I need to have it in stereo. Let me know if I'm wrong guys.
 
You must log in or register to reply here.
Back
Top