BenoA
Well-known member
I want to make a small portable pedalboard with 4 pedals on it, anyone uses a Rechargeable power supply?
The~Kid
Well-known member
Pretty much just get a CIOKS 4 and an Energizer Power Bank……
The more Watts and power the better.
You Can also use MyVolts along side the CIOKS 4 and Power Bank to power even more shit too.
Make sure to use the correct step up to not mess up any pedals and Center negative or positive and volts etc. Otherwise should be set with a CIOKS and a Power Bank.
This is also pretty clever…….
The more Watts and power the better.
You Can also use MyVolts along side the CIOKS 4 and Power Bank to power even more shit too.
Make sure to use the correct step up to not mess up any pedals and Center negative or positive and volts etc. Otherwise should be set with a CIOKS and a Power Bank.
This is also pretty clever…….
Last edited:
The~Kid
Well-known member
There is also the Alchemist Silent just released by MyVolts too.
This is probably the latest in portable PSU…… and it packs a lot of power too. With the step ups you could do anything……. along with daisy chains…..
This is probably the latest in portable PSU…… and it packs a lot of power too. With the step ups you could do anything……. along with daisy chains…..
Last edited:
mnemonic
Well-known member
With just 4 pedals I would get something like this and a daisy chain
https://www.thomann.co.uk/harley_benton_powerplant_powerbank.htm
Unless you’re using power hungry digital pedals 10,000 mah should last a good long while before needing a recharge. Good idea to unplug it when not in use though as even if the pedal is ‘off’ the circuit is still powered.
https://www.thomann.co.uk/harley_benton_powerplant_powerbank.htm
Unless you’re using power hungry digital pedals 10,000 mah should last a good long while before needing a recharge. Good idea to unplug it when not in use though as even if the pedal is ‘off’ the circuit is still powered.
The~Kid
Well-known member
Yeah I don’t know…..
When it comes to pedals I dont believe cheap is the best option and Harley Benton PSU are cheap……
On average most rigs cost a decent amount even if not a whole bunch….. Its best to get an actual solid PSU and not cheap out on stuff like that ImE.
YMMV but ImE it makes a difference to get a quality PSU.
JackBootedThug
MURDERATOR
That would solve a lot of ground loop problems for sure….
BenoA
Well-known member
Thanks for the idea on the MyVolts usb 9 volts adapter. These were very expensive here in Canada but found a "somewhat" equivalent with decent reviews of its usage with external pedals. I ordered one to try it out with a USB power bank I have. I just want to make a fun pedalboard to play outside on my condo balcony
