Setup question

[mniel8195]

I am setting up my suhr modern and I am setting up the bridge height using a sew Mac action ruler. Suhrs recommended string height is 4/64ths of an inch or 1/16ths of an inch. When I measure the bass side at the 24th fret with the ruler on the inside of the string. My question is when measuring the treble side should I flip the guitar around and measure from the inside of the string as well? I guess I'm taking the radius of the fret into consideration and the height difference that will occur in relation ship to the string and the reading I am getting. Thank you!

 

[glip22]

Not necessary. Just measure from players position. Inside of low E and outside of High E is fine at the 24th fret. Just a hair over 4/64th on the low E and 3-1/2 64ths is a good starting point. I set most of my Suhrs this way when I owned them.

 

[mniel8195]

I'm wondering if this is how suhr sets it anyone know?

 

[glip22]

I'm wondering if this is how suhr sets it anyone know?

It is but I'm curious why you care? Setups are personal taste.