Unbranded tubes

Techdeth

Techdeth

RESIDENT ROCK PROFESSOR
Is there a way to know who made this ?
I’m tube ignorant
image.jpg
image.jpg
 
Chinese, as stated ^^

Whether it's a square or round getter, that inside construction always denotes Chinese. I have Mesa, Rivera, and Peavey labelled as well as China A, Bs in my stash. Those are great and way better IMO to any new production pre tube.
 
View attachment 414978View attachment 414978I bought a bag of these . These are defects right ? Since they have a B ?
Is this correct ?
No, just denotes a Chinese 12AX7B. The B doesn't mean defective. There are newer production Bs, but if you can get the military version 6N4 those will have a lower failure rate than the newer Bs. That one is an older 8th/9th gen, however. The newer ones are in red print. From what I've experienced anyway.
 
Chinese, as stated ^^

Whether it's a square or round getter, that inside construction always denotes Chinese. I have Mesa, Rivera, and Peavey labelled as well as China A, Bs in my stash. Those are great and way better IMO to any new production pre tube.
So these Bs I have are actually good ?
I bought 10 for $35 off a dude
I thought they were going to be junk
 
No, just denotes a Chinese 12AX7B. The B doesn't mean defective. There are newer production Bs, but if you can get the military version 6N4 those will have a lower failure rate than the newer Bs. That one is an older 8th/9th gen, however. The newer ones are in red print. From what I've experienced anyway.
So these are decent ?
 
So these are decent ?
Yes; they are good tubes and are the older 8th or 9th gen from the late 80s/early 90s. Most will have the square shiny getter up top; but I also have some with the round halo getter. They are nice sounding tubes and if they are still testing strong, will sound better than any newer production tube. You'd have to try them out in your amps if you don't have a tester but you'll know if they are going bad. No risk to your amp though, unlike a bad power tube that can cause issues.

The newer production Bs with the red print are the sketchy ones. I bought 6 a few yrs back and 2 were bad. But, the military 6N4 with the star on the tube are the really good newer production Chinese.
Yours are older though, and if they are like mine will keep on lasting for a long time.
 
Yes; they are good tubes and are the older 8th or 9th gen from the late 80s/early 90s. Most will have the square shiny getter up top; but I also have some with the round halo getter. They are nice sounding tubes and if they are still testing strong, will sound better than any newer production tube. You'd have to try them out in your amps if you don't have a tester but you'll know if they are going bad. No risk to your amp though, unlike a bad power tube that can cause issues.

The newer production Bs with the red print are the sketchy ones. I bought 6 a few yrs back and 2 were bad. But, the military 6N4 with the star on the tube are the really good newer production Chinese.
Yours are older though, and if they are like mine will keep on lasting for a long time.
Thanks man . This helps a lot . You know you’re shit. Im def trying to pay attention now . I was like WAY off in my origional assessment lol
 
Back
Top