Use cab for load when slaving

[peterc52]

if I am slaving an amp into a power amp (VHT 2150) - could I then use a cab for load for the amp I’m slaving?

And turn volume down on the amp?

I you understand. So the amp always sees a load.

For example

IIC+ into VHT 2150 into cab (and guitar)
IIC+ into another cab and turn volume down (no guitar)

 

[WarHed]

It wont work if your master volume is before the fx loop or whatever part of the circuit the signal is sent from. Otherwise yes.

 

[Racerxrated]

if I am slaving an amp into a power amp (VHT 2150) - could I then use a cab for load for the amp I’m slaving?

And turn volume down on the amp?

I you understand. So the amp always sees a load.

For example

IIC+ into VHT 2150 into cab (and guitar)
IIC+ into another cab and turn volume down (no guitar)

If you don't want the dry sound of the slave amp you'll need a dummy load of some type. I think there are a few on the market; Suhr maybe? For me, I like the middle dry cab while each of the wet cabs are L-R of the dry cab; 5 ft out. Fun stereo spread.

 

[GreatRedDragon]

It'd be simpler to use a loadbox.