Superunknown
Well-known member
I just received my VH4 and am really loving it. Just curious as to what type of tubes you guys are using....mine is a 2008 model that came with chinese 9th pre's and SED EL34's....
Thx,
Todd
Thx,
Todd
MARK2C
Active member
I'm still running the original stock Chinese in V1-V7 and SED 6550's. Mine did come with a JJ ECC83 in the V1, but I swapped it out for a Chinese HG+.
PaulyPanacea
Active member
SED 6550s 
Ruby HG+ in V1 & V2. Ruby HG in rest. SLAYS! 
Ruby HG+ in V1 & V2. Ruby HG in rest. SLAYS! 
Ventura
Well-known member
=C= 6550's at about 80mA a pair
Chinese 12AX7B's and C's
Perfect
V.
Chinese 12AX7B's and C's
Perfect
V.
PaulyPanacea
Active member
Ventura":12298rmj said:=C= 6550's at about 80mA a pair
Chinese 12AX7B's and C's
Perfect
V.
80ma/pair...you pussy!!
Ventura
Well-known member
I KNEW you were going to find me out on this one Pauly...!!PaulyPanacea":3c4limyr said:Ventura":3c4limyr said:=C= 6550's at about 80mA a pair
Chinese 12AX7B's and C's
Perfect
V.
80ma/pair...you pussy!!
From the moment I typed '80mA' I thought "Aaaah, just wait, 'hundred mill Pauly' will say something about this".
V.
philbag
Member
My vh4 came with winged c el34s and a mixture of ruby hg+'s, ruby hg's and tad preamp tubes. I'm not fond of the winged c 34's in any guitar amp I've played so when I blew one I opted to put in in e34l's in the power section to try and maybe open the amp up, warm it up and maybe add some grit to my to my tone. I replaced v1 with a in ecc83S tube to try do the same thing.. I've had moderate success but the amp is still a bit compressed/ tight and attacky for my style, so I'm still experimenting. Im going to take the tungsol out of my marshalls v1 and try itin different spots in the vh4 today hopefully. I'm also looking at 12at7s or 5751's to put in some positions to try help open the amp up a bit moreand make me use the gain knob a bit more. Any one have any suggestions to try that would help get me closer to what I was mentioning before?
PaulyPanacea
Active member
Ventura":25gptu4b said:I KNEW you were going to find me out on this one Pauly...!!PaulyPanacea":25gptu4b said:Ventura":25gptu4b said:=C= 6550's at about 80mA a pair
Chinese 12AX7B's and C's
Perfect
V.
80ma/pair...you pussy!!
From the moment I typed '80mA' I thought "Aaaah, just wait, 'hundred mill Pauly' will say something about this".
V.
im sorry buddy...i just couldnt resist!!
Ventura
Well-known member
All good, Braddah...ALL good.PaulyPanacea":19nshhy6 said:Ventura":19nshhy6 said:I KNEW you were going to find me out on this one Pauly...!!PaulyPanacea":19nshhy6 said:Ventura":19nshhy6 said:=C= 6550's at about 80mA a pair
Chinese 12AX7B's and C's
Perfect
V.
80ma/pair...you pussy!!
From the moment I typed '80mA' I thought "Aaaah, just wait, 'hundred mill Pauly' will say something about this".
V.
im sorry buddy...i just couldnt resist!!
Hope you had a killer weekend - peace...
V.
philbag
Member
I've been swapping alot of tubes in my VH4 lately to experiment, I currently have this - Ruby HG+'s in V1/V4, JJ ECC83S's in V2, V3 and some TAD 12AX7's for the rest. Looking into 12AT7's/5751's for the phase inverter or even some use in the early sockets. Should be interesting.
