Wireless with a pedalboard?

[MotionlessInWhite]

I have a shure guitar wireless system my girlfriend got me a while back.
What's the best way to use this with my pedalboard?
Should i leave the receiver on my pedalboard?

Also, i'm looking into getting a pedal snake.
i want my Delay to go through my effects loop, and i don't want all these cables all over the place.
anyone have any feedback with them?
http://www.pedalsnake.com

 

[saxxamafone]

can't comment on the audio quality of the pedalsnake

i used one to power and send signal from my GRX4 to my tuner at the front of stage
Worked great and never let me down

 

[ttosh]

I would get a trailer trash board, then you can mount the pedal power you already have to the bottom of the board as well as your wireless. As far as the snake goes you may not need one once you consolidate all your power under the board....

 

[stratotone]

Could also mount that to the bottom of a pedaltrain pro also, I did.

Pete

 

[MotionlessInWhite]

Oh, so the wireless receiver can go underneath the board?
that's perfect.

 

[Little B]

IF you get a board that is deep enough underneath,you can put a lot of things like that underneath.Some people even shield the underneath of their boards to help w/ noise...Save up some dough and get a nice board to start with.Theres a gazillion different sizes out there..always get one w/ room to spare---you will need it someday....The trick usually comes down to getting everything secure and wired pro,and and place for your antennae to stick out..hope that helps

 

[dawnofdreamx97]

pedalsnake works great, it doesn't color the tone and streamlines setup time and tear down.


you can mount your wireless reciever ON the pedalboard itself and plug the output of the reciever to the main send to your amps input. very simple. you will need to run power through pedal snake for the wireless reciever also