WTB: Ceriatone Yeti/Chupa/Splawn Comp

  • Thread starter Thread starter napalmdeath
  • Start date Start date

To buy, sell, or trade in this section, you must have at least 50 posts and have two-factor authentication enabled.

napalmdeath

napalmdeath

Well-known member
Looking for single channel high gain modified Plexi. Must have GOOD FX LOOP! Prefer newer loop master on the Splawn.

Looking to spend up to $1000.
 
I have a really nice Chupa I’m thinking of letting go.
 
Don't want a Quick Rod, just a single channel. I'm about to pull the trigger on a Competition 50 watt, possibly....
 
You could shoot Scott a message and see if he can work you up a deal for black Friday. He has some good deals going on right now.
 
Yes it’s mine, standard effect loop. Works great!

Hot Rodded Plexi Chupacabra 50

Feature Overview
Cascading gain stage design with individual Gain controls
3-way Bright switch on each Gain 1 and Gain 2 controls
Feel switch adjusts attack and low contour
Era 3-way switch provides progressive levels of clipping and distortion
Rear-panel Pussy TrimmerTM allows the player to fine tune compression and saturation
Presence and Resonance controls adjust the high- and low-frequency content of the power section
Passive effects loop
DC heaters for low noise floor
Tubes
Power: 2 x EL34
Preamp: 3 x 12AX7/ECC83
Rectifier: Solid State



napalmdeath":1mgsvd4b said:
Fretburner":1mgsvd4b said:
https://postimg.cc/pyDMxZBJ

https://postimg.cc/qz4V73bV

https://postimg.cc/FkQt3dhS


1000.00 shipped. Killer sounding head.

What is it? Yeti? Is it yours?
What about the FX loop?
 
Fretburner":17ntdnjv said:
Yes it’s mine, standard effect loop. Works great!

Hot Rodded Plexi Chupacabra 50

Feature Overview
Cascading gain stage design with individual Gain controls
3-way Bright switch on each Gain 1 and Gain 2 controls
Feel switch adjusts attack and low contour
Era 3-way switch provides progressive levels of clipping and distortion
Rear-panel Pussy TrimmerTM allows the player to fine tune compression and saturation
Presence and Resonance controls adjust the high- and low-frequency content of the power section
Passive effects loop
DC heaters for low noise floor
Tubes
Power: 2 x EL34
Preamp: 3 x 12AX7/ECC83
Rectifier: Solid State



napalmdeath":17ntdnjv said:
Fretburner":17ntdnjv said:
https://postimg.cc/pyDMxZBJ

https://postimg.cc/qz4V73bV

https://postimg.cc/FkQt3dhS


1000.00 shipped. Killer sounding head.

What is it? Yeti? Is it yours?
What about the FX loop?
I gotta have the better loop, or I'd consider it.
 
Where can you get a 50 watt quickrod for $1350???
 
Back
Top