napalmdeath
Well-known member
Looking for single channel high gain modified Plexi. Must have GOOD FX LOOP! Prefer newer loop master on the Splawn.
Looking to spend up to $1000.
Looking to spend up to $1000.
Fretburner
Active member
I have a really nice Chupa I’m thinking of letting go.
napalmdeath
Well-known member
Bump
C
ClintN667
Banned
Well-known member
You can get a 50 watt quick rod new for $1350
napalmdeath
Well-known member
Don't want a Quick Rod, just a single channel. I'm about to pull the trigger on a Competition 50 watt, possibly....
C
ClintN667
Banned
Well-known member
You could shoot Scott a message and see if he can work you up a deal for black Friday. He has some good deals going on right now.
Fretburner
Active member
https://postimg.cc/pyDMxZBJ
https://postimg.cc/qz4V73bV
https://postimg.cc/FkQt3dhS
1000.00 shipped. Killer sounding head.
https://postimg.cc/qz4V73bV
https://postimg.cc/FkQt3dhS
1000.00 shipped. Killer sounding head.
napalmdeath
Well-known member
Fretburner":3tfz0m6a said:
What is it? Yeti? Is it yours?
What about the FX loop?
Fretburner
Active member
Yes it’s mine, standard effect loop. Works great!
Hot Rodded Plexi Chupacabra 50
Feature Overview
Cascading gain stage design with individual Gain controls
3-way Bright switch on each Gain 1 and Gain 2 controls
Feel switch adjusts attack and low contour
Era 3-way switch provides progressive levels of clipping and distortion
Rear-panel Pussy TrimmerTM allows the player to fine tune compression and saturation
Presence and Resonance controls adjust the high- and low-frequency content of the power section
Passive effects loop
DC heaters for low noise floor
Tubes
Power: 2 x EL34
Preamp: 3 x 12AX7/ECC83
Rectifier: Solid State
Hot Rodded Plexi Chupacabra 50
Feature Overview
Cascading gain stage design with individual Gain controls
3-way Bright switch on each Gain 1 and Gain 2 controls
Feel switch adjusts attack and low contour
Era 3-way switch provides progressive levels of clipping and distortion
Rear-panel Pussy TrimmerTM allows the player to fine tune compression and saturation
Presence and Resonance controls adjust the high- and low-frequency content of the power section
Passive effects loop
DC heaters for low noise floor
Tubes
Power: 2 x EL34
Preamp: 3 x 12AX7/ECC83
Rectifier: Solid State
napalmdeath":1mgsvd4b said:
napalmdeath
Well-known member
I gotta have the better loop, or I'd consider it.Fretburner":17ntdnjv said:
napalmdeath
Well-known member
Bump
M
motorboy1
Well-known member
Where can you get a 50 watt quickrod for $1350???
napalmdeath
Well-known member
motorboy1":1ur1zn6y said:
I saw a special on their Facebook page..
https://barrztrading.ecwid.com/Splawn-2 ... 3RrfopHFQs
C
ClintN667
Banned
Well-known member
They have the supersport for $1100
