Wayne Griffin - put on your cape we need you

  • Thread starter Thread starter Bxlxaxkxe
  • Start date Start date
Bxlxaxkxe

Bxlxaxkxe

Amp ho
The Deadweald Duality has been out of production for some time now and it doesn’t look like it’s coming back. It’s a killer pedal especially for a mid gain marshall that needs a big kick in the nuts. You’d sell a ton of em. Can you make it happen????
 
Griff one thing I will say is I don’t have a need for the gate part personally. What’s cool about it is it can be

TS boost
TC Boost
A TS into a TC at the same time

It really is killer
 
so a tube screamer into a Integrated Pre amp ?? with the option to run each one by itself ?
 
griff10672 said:
so a tube screamer into a Integrated Pre amp ?? with the option to run each one by itself ?
Click to expand...

I’m honestly not 100% sure of the order when both sides are on. I’ve always assumed it’s the TC first. Shit maybe it’s both in parallel?

It would honestly be cooler to have it in a bigger enclosure and each “side” has its own footswitch. You could have just one side or the other on, or both at the same time. And then maybe a little mini switch to flip flop the order when both are in at the same time. Boom done
 
Bxlxaxkxe said:
I’m honestly not 100% sure of the order when both sides are on. I’ve always assumed it’s the TC first. Shit maybe it’s both in parallel?

It would honestly be cooler to have it in a bigger enclosure and each “side” has its own footswitch. You could have just one side or the other on, or both at the same time. And then maybe a little mini switch to flip flop the order when both are in at the same time. Boom done
Click to expand...
just a little switch to flip flop the order huh ?? lol
 
griff10672 said:
just a little switch to flip flop the order huh ?? lol
Click to expand...

Correction to my post above - I always assumed it was the TS first when both are on. I may be wrong.

And hey forget the mini toggle idea if that makes it unnecessarily complicated. I’ve just seen it on dual circuit single enclosure pedals before. Whatever order the original has, copy that and everyone will be happy
 
Bxlxaxkxe said:
Correction to my post above - I always assumed it was the TS first when both are on. I may be wrong.

And hey forget the mini toggle idea if that makes it unnecessarily complicated. I’ve just seen it on dual circuit single enclosure pedals before. Whatever order the original has, copy that and everyone will be happy
Click to expand...
the thing with switching the order is ..... do you do a toggle or do you add another FS and have three .... honestly if I were doing this combo I would run the TS into the pre ..... the TC Pre runs at around 34 volts of headroom .... so with the TS at only 9v .... it's kind of a no brainer ....
 
You can run separate or both together. Classic mode (green LED) is TS, modern mode (blue LED) is TC and fusion mode (red LED) is both together. It has an internal charge pump as well for the TC side. The noise gate is based off his Golem pedal
 
This Griffin Analog virus has infected my entire pedal board. My old drives are slowly falling off my board. It's only time before it infects my modulation effects. I'm not sure there is a cure. :no:

1741740843845.png
 
You must log in or register to reply here.
Back
Top