
frthib
Active member
Hi, I'm not a usual gear demonstrator but I made those tracks to make soundclips available of the amp.
Someone had to do them so...
Lapointe Starsonic, 100% solid state, original design from Montréal based on tube amp circuitry.
there is a power amp control designed to add tube power section saturation/coloration..
the amp tone respond to the cab impedence load..
I recorded those with the power level "off", since it's really loud.. The master volume is usually a 4-5 ish excepted when mentionned.
There is a TS9 before the amp to boost the signal a little.
The cab is a 2x12 with celestion lynchbacks miced with dual sm57. Not eq where used. I added a bit of room and plate reverb..
Someone had to do them so...
Lapointe Starsonic, 100% solid state, original design from Montréal based on tube amp circuitry.
there is a power amp control designed to add tube power section saturation/coloration..
the amp tone respond to the cab impedence load..
I recorded those with the power level "off", since it's really loud.. The master volume is usually a 4-5 ish excepted when mentionned.
There is a TS9 before the amp to boost the signal a little.
The cab is a 2x12 with celestion lynchbacks miced with dual sm57. Not eq where used. I added a bit of room and plate reverb..