beachbum
New member
Hey guys check this out!
The new “MP-1-CHANNEL” pedal from ADA delivers the renowned tone of our rack-mount MP-1 guitar preamp in a small stomp box enclosure. The ground-breaking MP-1 preamp was the rack-mount staple for a long list of touring bands in the late 80s and early 90s. Paul Gilbert, Kirk Hammett, Vito Bratta, Jamie Glaser, Bill Connors, Wayne Johnson, Dave Mason, Bruce Bouillet, Vernon Reid, Steve Bertek – just to name a few – created their unique tone with the MP-1. The new MP-1-CHANNEL lets you dial-in crystal clear clean tones, bluesy overdrives, sweet lead distortion to searing high-gains with sustain or bite. “British-boost” the mids or suck them out with the wide- range ADA tone stack. Use the OD-1 and OD-2 to create even and odd harmonic distortion or crank them up to get today’s super high-gain and full-saturation for both bass and treble grind.
The MP-1-CHANNEL’s gain, voicing and tone stacks are the same design as the original MP-1, and we’ve added a True Bypass foot switch for seamless integration into your pedal board. Of course, the internal voltages are also the same as the original MP-1with 280 volts on the 12AX7 tubes.
The MP-1-CHANNEL is housed in a heavy-duty steel enclosure and measures 5.4” length by 5” width by 1.8” height – a small box with a lot of gain, character and pedigree. Included is a 12VDC AC adapter suitable for any AC power source from 100 volts to 250 volts. You can also use your pedal board power supply, if it can provide 12VDC with at least 700mA.
The MP-1-CHANNEL is available now. You can find the MP-1-CHANNEL at ADA dealers for $399.95.
The new “MP-1-CHANNEL” pedal from ADA delivers the renowned tone of our rack-mount MP-1 guitar preamp in a small stomp box enclosure. The ground-breaking MP-1 preamp was the rack-mount staple for a long list of touring bands in the late 80s and early 90s. Paul Gilbert, Kirk Hammett, Vito Bratta, Jamie Glaser, Bill Connors, Wayne Johnson, Dave Mason, Bruce Bouillet, Vernon Reid, Steve Bertek – just to name a few – created their unique tone with the MP-1. The new MP-1-CHANNEL lets you dial-in crystal clear clean tones, bluesy overdrives, sweet lead distortion to searing high-gains with sustain or bite. “British-boost” the mids or suck them out with the wide- range ADA tone stack. Use the OD-1 and OD-2 to create even and odd harmonic distortion or crank them up to get today’s super high-gain and full-saturation for both bass and treble grind.
The MP-1-CHANNEL’s gain, voicing and tone stacks are the same design as the original MP-1, and we’ve added a True Bypass foot switch for seamless integration into your pedal board. Of course, the internal voltages are also the same as the original MP-1with 280 volts on the 12AX7 tubes.
The MP-1-CHANNEL is housed in a heavy-duty steel enclosure and measures 5.4” length by 5” width by 1.8” height – a small box with a lot of gain, character and pedigree. Included is a 12VDC AC adapter suitable for any AC power source from 100 volts to 250 volts. You can also use your pedal board power supply, if it can provide 12VDC with at least 700mA.
The MP-1-CHANNEL is available now. You can find the MP-1-CHANNEL at ADA dealers for $399.95.
Id think if you were looking for something pedal based a rack unit would have a tough time fitting on a pedal board.
and this is just the start for on the go solutions from ADA
