Bareknuckle Nailbomb

  • Thread starter Thread starter brocksteady70
  • Start date Start date
B

brocksteady70

New member
I have a PRS Custom 24(trem) and I want to put a Nailbomb in the bridge position. What spacing should I get, 50mm(standard) or 53mm? I measured and it was 2 inches (50.8MM) from string to string.

Thanks
 
I beleive the spacing is 52mm. Ask Tim at BK., He will probably tell you wide spacing I had Nailbombs in a PRS Custom24. Sounded good. I think the bridge was wide(53MM spacing), but I can't remember exactly.
 
from the BKP site

"What spacing is right for my bridge humbucker? Spacing refers to the distance from E pole to E pole on the bridge pickup of a humbucker equipped guitar. Standard spacing, usual with fixed Gibson style bridges is 50mm(it's actually 49.4mm on BKPs as per the original Gibson PAF but is rounded up to 50mm in the industry). Wide or F(Fender) spacing is typical of trem equipped guitars and is 53mm as per original Fender spacing. The majority of Gibson guitars are standard spaced although they have occasionally used a wide spaced bridge on some SG and Flying Vee series. PRS, despite fitting standard spaced humbuckers as stock are actually wide spaced on their trem equipped guitars.Neck pickups are always standard spacing. If in doubt...get the ruler out! "

I got miricle man set from him for a 24 PRS (one with a trem) and they were 53
 
Back
Top