Biasing my Lil Fokker

[DragonCrestPC]

Hey guys, im going to be changing the tubes on my Lil Fokker for the first time since i bought it and i noticed it doesn't have rear bias test points like other Diezels. Before i crack it open does anybody know where or have some shots of the biasing test points? Im going to continue using KT77's ( just love the way they sound on diezels ) and would just like a little info before going in. Thanks again.

 

[Wizard of Ozz]

If you've not biased an amp via the transformer before... I'd recommend investing in a bias meter with the attached socketed probes.

 

[Vin Diezel]

The Fokker has 4 1k resistors built in to measure the mV to ground. That's how you do it.
Don't hurt yourself, man!

 

[DragonCrestPC]

Thanks for the advice guys! Since i've changed filter caps before i'll give the resistor method a shot. Thanks again guys, i wish there was a +rep for members like on other forums.

 

[Vin Diezel]

The resistors are already there. You just need a multimeter.

 

[MetalHeadMike]

If you've not biased an amp via the transformer before... I'd recommend investing in a bias meter with the attached socketed probes.

Multi-meter w/ socket attached leads.