S Sergii New member Mar 10, 2021 #1 Hi guys. Which kHz rate should I chose to load to Captor X? For instance I have Bogren Signature IR pack and it's 44.1, 48, 88.2 and 96 kHz IRs inside. So which one is the best for Captor X 16?
Hi guys. Which kHz rate should I chose to load to Captor X? For instance I have Bogren Signature IR pack and it's 44.1, 48, 88.2 and 96 kHz IRs inside. So which one is the best for Captor X 16?
D Dilan - Two notes Active member Mar 19, 2021 #3 Hello @Sergii @BZGS , yes you are right. Thank you for your positive input
D deloosem New member Mar 19, 2021 #4 so 96khz is useless? I was alway using the 96khz 200 ms, I thought since the captor x works at 96khz. Too much?
so 96khz is useless? I was alway using the 96khz 200 ms, I thought since the captor x works at 96khz. Too much?
D deloosem New member Apr 6, 2021 #5 deloosem said: so 96khz is useless? I was alway using the 96khz 200 ms, I thought since the captor x works at 96khz. Too much? Click to expand... anybody?
deloosem said: so 96khz is useless? I was alway using the 96khz 200 ms, I thought since the captor x works at 96khz. Too much? Click to expand... anybody?
D Dilan - Two notes Active member Apr 13, 2021 #6 Hello @deloosem It will not change much as 3rd party IRs are converted by Torpedo Remote to 48kHz before going through the audio processor.
Hello @deloosem It will not change much as 3rd party IRs are converted by Torpedo Remote to 48kHz before going through the audio processor.