Captor X - Attenuate guitar cab and virtual cab out to FRFR?

[BatmansRigTalk]

I have two registered products. Torpedo Live and a Captor X 8.

Is it possible to do a type of split where the Captor X is attenuating the signal between the amp and the guitar cab and is also outputting Wet and Dry from the two XLR connections into a DAW at the same time? I don't want to hear the cab sim through my guitar cab.

Just connect the cab to the speaker out? XLR outputs in my DAW will be Wet/Dry signals?

 

[Ventura]

I have two registered products. Torpedo Live and a Captor X 8.

Is it possible to do a type of split where the Captor X is attenuating the signal between the amp and the guitar cab and is also outputting Wet and Dry from the two XLR connections into a DAW at the same time? I don't want to hear the cab sim through my guitar cab.

Just connect the cab to the speaker out? XLR outputs in my DAW will be Wet/Dry signals?

Section 5.4.2 in the CaptorX Manual:

5.4.2 With a cabinet​

Connect your favorite cabinet and mic it to have 3 different signals recorded at the same time. Use the different Volume Level settings to adjust the level of the cabinet.