
tweed
New member
Searching for a broken down marshall to hack up, and not having much luck. Thinking about a kit from Ceriatone. Have heard some good things in the past, and the prices look reasonable.
Thoughts?
Thoughts?
duesentrieb":dni6gcb6 said:I love their metal chassis - so many cool little features compared to other manufacturers like little nuts for the switches and "non-round" holes for the fuses.
I have used both metro chassis and the ceriaton chassis, I like the ceriatone one better.Digital Jams":3vpf3pys said:Only thing I have heard negative is that the chassis metal is on the thin side, I have never seen one myself and dont think that it would bother me.
I still say stick to your guns and wait for that 1987x to show up for $6-700 bucks.
The Ceriatone chassis I bought was a monster. Thick metal and heavy.Digital Jams":34mh5n5w said:Only thing I have heard negative is that the chassis metal is on the thin side, I have never seen one myself and dont think that it would bother me.
I bought a kit and it has everything you need to make a complete amp including a pre-wired board that kinda takes the fun out of it... No assembly instructions, but a fairly good layout diagram. You should be able to figure it out. That said the Metro kits come with everything and a 50+ page, well-illustrated instruction manual. I'd go metro for a first time build, but that's just me.tweed":36qraxk5 said:duesentrieb":36qraxk5 said:I love their metal chassis - so many cool little features compared to other manufacturers like little nuts for the switches and "non-round" holes for the fuses.
If you have ordered a kit from them Olaf, does it come with everything you need to complete the amp, like tube sockets, etc? It's hard to tell from their site, looks like you get a prewired board, chassis, faceplates, and can omit the transformers and headshell. Never really says if you get everything you need though. I'm also betting no assembly instructions, but you could probably use the metro amp stuff and get close.
![]()
sah5150":43546pgp said:I bought a kit and it has everything you need to make a complete amp including a pre-wired board that kinda takes the fun out of it... No assembly instructions, but a fairly good layout diagram. You should be able to figure it out. That said the Metro kits come with everything and a 50+ page, well-illustrated instruction manual. I'd go metro for a first time build, but that's just me.tweed":43546pgp said:duesentrieb":43546pgp said:I love their metal chassis - so many cool little features compared to other manufacturers like little nuts for the switches and "non-round" holes for the fuses.
If you have ordered a kit from them Olaf, does it come with everything you need to complete the amp, like tube sockets, etc? It's hard to tell from their site, looks like you get a prewired board, chassis, faceplates, and can omit the transformers and headshell. Never really says if you get everything you need though. I'm also betting no assembly instructions, but you could probably use the metro amp stuff and get close.
![]()
You would not want to use the Metro instructions - they won't be accurate because you won't have some of the stuff Metro provides to assure a clean build.
Steve
If you're still looking for a donor Marshall I was in the Greensboro NC guitar center last week and they had a vertical input 2204 head for $749. It has obviously been modded before but looks to have been put back to stock. Had an extra hole in the front panel and holes for a loop and who knows what else in the back, they were all filled with plastic plugs. I didn't play it or anything so I certainly can't vouch for it but it might be worth it for a mod project if you could haggle with them a bit. It could be a nightmare inside though.tweed":dk3ratkk said:Searching for a broken down marshall to hack up, and not having much luck. Thinking about a kit from Ceriatone. Have heard some good things in the past, and the prices look reasonable.
Thoughts?