From Scratch Amp Building Chronicle - 6/13/10 UPDATED!!

  • Thread starter Thread starter Anonymous
  • Start date Start date
Dude, you have maybe 17 days left to be done. I arrive Thursday the 14th a little before lunchtime. I expect it fired up and waiting in my room for a test drive! :gethim: ;) :D
 
tweed":ea8t6x69 said:
Dude, you have maybe 17 days left to be done. I arrive Thursday the 14th a little before lunchtime. I expect it fired up and waiting in my room for a test drive! :gethim: ;) :D
Click to expand...
I'm going as fast as I can! :D :rock: I was hoping to be off between Christmas and New Years to finish up, but no dice this year...

Steve
 
sah5150":23uak8j0 said:
tweed":23uak8j0 said:
Dude, you have maybe 17 days left to be done. I arrive Thursday the 14th a little before lunchtime. I expect it fired up and waiting in my room for a test drive! :gethim: ;) :D
Click to expand...
I'm going as fast as I can! :D :rock: I was hoping to be off between Christmas and New Years to finish up, but no dice this year...

Steve
Click to expand...

Well just have to have drinks then :rock:
 
tweed":39dtxyi8 said:
sah5150":39dtxyi8 said:
tweed":39dtxyi8 said:
Dude, you have maybe 17 days left to be done. I arrive Thursday the 14th a little before lunchtime. I expect it fired up and waiting in my room for a test drive! :gethim: ;) :D
Click to expand...
I'm going as fast as I can! :D :rock: I was hoping to be off between Christmas and New Years to finish up, but no dice this year...

Steve
Click to expand...

Well just have to have drinks then :rock:
Click to expand...
I'm in!

Steve
 
very awesome man! i'm still very anxious to hear this thing though so get to it!! :gethim:
 
killertone":wzh4ya64 said:
Looking great, Steve. The board looks like a ton of work! :doh:
Click to expand...
Thanks man! Building the board really is a ton of work. It would be way easier with a metal template, but since I don't have one, I had to eye each hole in the template and try to line up the drill press perfectly to drill each hole. As I said, it is not perfect, but pretty damn good. I actually used an entire bag of 100 1/8" eyelets for this board! :shocked:

Steve
 
jasonP":2167mifs said:
Hey Steve, would it be ok with you if I used your layout of the slave out on my slocloner amp I built?

I only have a 5k L pot.. do you think this would work in place of your 25k? I was thinking of maybe doing this way which looks close to what you are doing..? http://forum.metroamp.com/viewtopic.php ... ut#p207505

Thanks Steve!
Click to expand...
Yeah man! Use whatever ya want - that is why I posted everything... 5K should be fine...

Steve
 
Steve I believe you have to move the 2.2k resistor to the other side of the slave pot from looking at the Layout on the metro forum... Do you see it or am I blind!? :lol: :LOL:
 
jasonP":zqkemrfv said:
Steve I believe you have to move the 2.2k resistor to the other side of the slave pot from looking at the Layout on the metro forum... Do you see it or am I blind!? :lol: :LOL:
Click to expand...
You're correct and I fixed my latest layout. That is why it always pays to have an extra set of eyes go through all this! Thanks!

Steve
 
Looks great, Steve. Didn't you like the green-ish boards?
 
duesentrieb":uczxkcqd said:
Looks great, Steve. Didn't you like the green-ish boards?
Click to expand...
I love 'em. I was just practicing on the red swirl since I hadn't cut a board before. My intention was to practice and see where my problems were on the red board, but it came out ok, so no need to do it again now. I'll use the green-ish boards on the next one! :rock:

Steve
 
duesentrieb":rygyow0i said:
I'm glad that you dig them, Steve.
Click to expand...
Thanks so much for all the stuff you sent me, man!

BTW - I got the next few days with no work - gonna spend these next few days working on my amp - hope to make a ton of progress!!

Steve
 
You must log in or register to reply here.
Back
Top