g major eq ?

[dawnofdreamx97]

How the heck do you get to the gmajor eq and noise suppresor settings... Ive been in the manual cant seem to find out how to do this.... ? hmmm any help is much appreciated fella's

 

[King Crimson]

How the heck do you get to the gmajor eq and noise suppresor settings... Ive been in the manual cant seem to find out how to do this.... ? hmmm any help is much appreciated fella's

It’s quite a bit different for the G-Force, but by memory with the G-Major:

double press the "NOISE GATE" effect block to the right of the display window. This will engage the noise gate parameters. I would typically use "mode = soft, threshold = 33 dB, dampening factor = 25 dB, release = 100dB/s." for starters.

As you scroll to the right while still in the "NOISE GATE" effect block you will see "EQ Active = OFF." Set it to "EQ Active = ON." From there you now have 3 active EQs to work with; Frequency, Gain and Width for EQ1, EQ2 and EQ3.

Attached is the G-Major manual.

- David

 

[dawnofdreamx97]

found it ! dont know why i couldnt figure this out....... thanks man!

I eq'd a tad with the g major and got a closer tone but still not 100% ...

 

[King Crimson]

I eq'd a tad with the g major and got a closer tone but still not 100% ...

What amp are you using with the G-Major and how do you have it setup? I'd suggest to EQ your amp as best as possible and only use a secondary EQ on if it is absolutely necessary.