Huge rig traded in. Need help with cables hook up.

[fireheart82]

i traded my amppedals with a seriouse rig and need opinoins on the best hook up.
the rig is in 2 boxes. One vintage and one metal part. so when i (and previouse owner too) was going on gigs, we can choose one or booth for the jam style. i want a whole setup thru mixer. i now just use box 2. what is best to control it by the midi board and for the sound quality. im a carpenter and only operated on pedals and a eas amp. tell me fex balanced right out to midi thru bradshaw etc
Box 1:
Yamaha Spx90 (reverb+)
T.C 1210 flanger expander
T.C D-two delay
C.A.E mixer
Rocktron Bradshaw Rsb-12R switching system, midi board

Box 2:
Samson Powerbrite pb11
T.C G-force multi fx
Egnater Ie4(rocktron)
VHT 2502
Mesa Black Shadow
picture in the last of them:
http://www.finn.no/finn/torget/tilsalgs ... dTypeId=67

 

[fireheart82]

please help a little on my way.

 

[steve_k]

You dont' need that CAE Line Mixer and should sell it to me......

Steve

 

[fireheart82]

what will you offer me ?

 

[fireheart82]

IE4 pre amp out -> TC1210 IN (bypass TC1210 med switch på baksiden styrt fra RSB12r control switch)
TC1210 out L&R -> CAE mixer input1 L&R
EXP1 OUT-> loop X -> Loop X send in i SPX90 (SPX90 satt til micro pitch høyre+venstre)
SPX90 OUT L&R -> MIX 1 IN2 L&R
MIX 1 OUTL -> Loop Y -> Loop Y send inn i Dtwo
Dtwo OUT L&R -> mix2 IN2
MIX2 OUT -> Power amp
Midi out off RSB18r up to IE4

 

[fireheart82]

where should g-force come in here? is this right!?

 

[steve_k]

G-Force between the preamps and power amp through the mixer with the rest of it. Depends if it is to be for A/B or Y on where it goes. But, yes, you are on the right track. And, just kidding - you need the line mixer. But, if you ever simplify, PM me and let me know when you are ready to sell it. Sent you a PM though.

Steve

 

[fireheart82]

can you explain me your way!? cuz i dont have loop x and y. i have on the rsb12r numbers 1.2.3.4.5.11.11. c3, c3\4 etc. the mixer has just numbers too

 

[fireheart82]

now im not a rookie my problem is now this:
i want to have tc1210 shut on off with exbypass with hush fex. the egnater uses c3/c4 to use a/b switching his 4 channels with. tc1210 will not work propertly in c1/c2..

help guys.