N
Navigator
Member
I realize that I'm overthinking this a bit, but hopefully I can get a little more information from Marshall B cab owners.
As I mentioned in my previous thread, I'm restoring an old (1974) Marshall straight front cab. I've installed a new baffle from Mojotone and have now also made a drill template for the new logo.
Because the new baffle has a larger piece of wood (behind the grill cloth) for mounting the logo than the original baffle did, I just want to be sure that I place the logo at the same height that Marshall generally does.
So if anyone has a Marshall B/straight cab, could you measure the space between the bottom of the logo itself and the bottom lip of the cab that the white piping sits on and let me know what that measurement is? (As far as I can tell it should be somewhere around 11 1/4" or so.)
I've visited the two Guitar Centers near me, but they only had A cabs, so I couldn't get the info there. Thanks in advance for the assistance.
As I mentioned in my previous thread, I'm restoring an old (1974) Marshall straight front cab. I've installed a new baffle from Mojotone and have now also made a drill template for the new logo.
Because the new baffle has a larger piece of wood (behind the grill cloth) for mounting the logo than the original baffle did, I just want to be sure that I place the logo at the same height that Marshall generally does.
So if anyone has a Marshall B/straight cab, could you measure the space between the bottom of the logo itself and the bottom lip of the cab that the white piping sits on and let me know what that measurement is? (As far as I can tell it should be somewhere around 11 1/4" or so.)
I've visited the two Guitar Centers near me, but they only had A cabs, so I couldn't get the info there. Thanks in advance for the assistance.
