jkdsteve
Active member
Now to go searching through the box for the bra(s)! 
ruso
New member
JKD":3f8ks1j4 said:Now to go searching through the box for the bra(s)!
I was going to check out the brazier on my 112 but how the hell do you get to it? Does the front grille come off?
Enjoy the subsonic bottom end btw.
jkdsteve
Active member
I raised the 1x12 off the floor (it's on top of the 2x12) for now.... 
The 2x12 has tabs you can pull the grille off easily (I just fitted it's training bras
) but the 1x12...looks like a screwdriver job and I'm scared to :-/
It's a 1(?) inch thinck 5(?) inch diam. foam diffuser (on my 2x12) that filters the beaming high end from the cone centre...surprised at the difference such a little thing made on my 2x12
The 2x12 has tabs you can pull the grille off easily (I just fitted it's training bras
) but the 1x12...looks like a screwdriver job and I'm scared to :-/It's a 1(?) inch thinck 5(?) inch diam. foam diffuser (on my 2x12) that filters the beaming high end from the cone centre...surprised at the difference such a little thing made on my 2x12
B
Buckeyedog
Active member
It appears the new one's don't have the tabs. I just left mine on and took off the back and reached through the port to check and I could feel it. I figured that was good enough! I was too whimpy to try and pry off the grill.......figure I'd bugger something up.
EWSEthan
Active member
My 1x12 has the pull tabs ont he front but they are worthless. The grill is on WAAAAAY too tight to be able to be pulled off. I pryed mine off with a flat head screwdriver to take a look at the bra!
Hectic Watermelon
Member
EWSEthan":2gmtm9m0 said:
...go see and dentist for that shi' and get a less demanding ho'
ruso
New member
John Czajkowski":3wlol9xf said:...go see and dentist for that shi' and get a less demanding ho'
LOL
muudrock
Active member
John Czajkowski":cln985cf said:EWSEthan":cln985cf said:
...go see and dentist for that shi' and get a less demanding ho'
..fa shizzle!