For Sale Rocktron Intellifex XL & Power Station, Axess Electronics MFC5 MIDI Footcontroller

To buy, sell, or trade in this section, you must have at least 50 posts and have two-factor authentication enabled.

Snave

Snave

Well-known member

Rocktron Intellifex XL Multi-Effects Processor - $315 + shipping​


Rocktron Intellifex XL multi-effects processor. Legendary rack unit prized by guitarists for its pristine effect quality, zero dry signal coloration, and incredibly low noise floor.

The XL version provides more processing power, double the delay memory, an expanded frequency range, and a double-precision 4-band parametric EQ. It is the highest-tier iteration of the Intellifex line.

Unit works well. Some encoder knobs skip a bit if adjusted too quickly, but operation is totally solid.

No 9V power supply included—was used with Rocktron Power Station rackmount power supply (also listed for sale). Third party replacements are available on eBay (item number 152720312748) or Amazon ("MyVolts 9V Power Supply for Rocktron Intellifex").

14c7eaed-fa93-46f2-9ccc-f1296aa48209.jpg


11313f8e-7198-4cfc-90f0-d7368007ccca.jpg


Rocktron Power Station (Rackmount 9VAC & IEC Power Supply) - $225 + shipping​


Rocktron Power Station rackmount power supply. Get rid of power strips and wall warts from your rack with this vintage unit. Good condition, works perfectly. Includes a variety of cables (3x 9VAC barrel cable, 2x IEC female to NEMA 5-15R [to power hardwired units], 2x IEC female to IEC male power cable, and power cable for the unit itself).

Features 6 isolated 9VAC 2000ma 2.5mm outputs (for units such as Rocktron Intellifex, Voodoo Lab GCX, ISP Rack Decimator, Custom Audio Electronics 4x4, etc.) and 4 auxiliary line voltage IEC outputs (switchable depending on the operating country).

Same unit used in touring racks of Allan Holdsworth, Page Hamilton (Helmet) and K.K. Downing (Judas Priest).

MANUFACTURER DESCRIPTION

The Power Station enables you to dramatically clean up that tangled mess of wall warts that exist in most rack systems by offering six isolated 9VAC/2000mA taps and four IEC connectors to power other equipment.

The Power Station's 9VAC taps are switchable from 100/110VAC to 220/240VAC allowing those components to operate worldwide. By offering other IEC connectors, 220/240VAC may also be used to operate your other equipment, once that equipment is also switched to 220/240VAC operation.

Power Station can really clean house in your rack system.


POWER STATION SPECIFICATIONS

  • Six 2.5mm pin jack 9VAC/2000mA taps with switchable AC operation
  • 100/110VAC to 220/240VAC
  • Four IEC plugs non-switchable
9c23135a-b4c6-4038-9586-118f702fb0f2.jpg


0cf679f1-70f3-435e-9395-3af74cff8bf4.jpg

7a9a91dc-a1bb-43c7-a80f-1b2ef6e82173.jpg


Axess Electronics MFC5 MIDI Footcontroller - $225 shipped​

Axess Electronics MFC5 MIDI foot controller. One of the most powerful compact MIDI controllers available. Works perfectly.

Mario Marino of Axess Electronics now works for Mesa Boogie designing MIDI devices.

Features:

• The MFC5 MIDI Footcontroller is a compact, rugged, simple to use, fully programmable MIDI footcontroller.
• 82 presets are arranged into 27 banks of 3 presets, and 1 global preset which is common to all banks.
• Each preset can transmit 8 MIDI Control Changes on a single MIDI Channel and any 2 MIDI Program Changes on 2 MIDI Channels.
• Capable of controlling two or more (with MIDI mapping) rack effects and eight loops and/or control functions on most commercial switchers.
• All User Data is stored in Non-Volatile EEPROM memory.
• A large three-character seven-segment display allows for easy viewing of the bank number and editing data on any stage.
• Five long-lasting, heavy-duty Carling stomp switches (the real ones...) offer a positive tactile feel.
• Powered by a 9VAC Adapter with a 5.5mm/2.1mm barrel connector or through a 7-pin MIDI cable.
• Housed in a compact (7.50"W x 4.75"D x 1.25"FH x 2.00”RH) and rugged .094” thick aluminum enclosure for years of reliable use and performance.
• Brushed finish with black anodize coating and laser-engraved printing.

2eb9b627-11f8-4530-a2ab-ec5baa5f88f3.jpg

65d80cb2-259d-4ca2-9130-4c7666ca5617.jpg
 
Back
Top