What oil do I use to clean a Floyd Rose?

[ceremony5150]

What oil do I use to clean a Floyd Rose?

Does Dunlop make a cleaner/Lubricant that will clean a Floyd Rose?

 

[Findthetone1]

Shouldn't really clean it with oil. That's just going to attract dirt. If it's off the guitar and really dusty I use simple green and warm water and dry it using a can of compressed air and a towel. The I use 3 in one oil for the fine tuners, clamp screws and pivot points.
If it's on the guitar a towel and q-tips

 

[Metlupass2]

Valvoline

 

[LanierP]

Slick 50

 

[Findthetone1]

Valvoline

Conventional,synth-blend or fully synthetic?
Oh, and what filter do I use?

 

[ZachMN]

I agree with the 3in1- I use that on all threads and pivots. Yes it attracts dirt but I'd rather have dirt on good metal than rusted metal (we've all seen the bridges rotted with rust). Just dab a little on and you can wipe off the excess. If yo're worried about dirt use some compressed air once
in a while to blow the dirt off.

 

[LanierP]

I agree with the 3in1- I use that on all threads and pivots. Yes it attracts dirt but I'd rather have dirt on good metal than rusted metal (we've all seen the bridges rotted with rust). Just dab a little on and you can wipe off the excess. If yo're worried about dirt use some compressed air once
in a while to blow the dirt off.

Yes, kidding aside, 3 in 1 oil is great. And it lasts forever. I did one application on my EVH Musicman back in 94, and she's still lubed up. +1