4x12 morphed into 2x12

  • Thread starter Thread starter EyesOfTheSouth!
  • Start date Start date
E

EyesOfTheSouth!

Well-known member
I had a 1960a laying around collecting dust. Put a couple plywood blanks over the holes and loaded up some Neo Creambacks I had.

Sounds great. The tight/snappy (borderline thin) Neos work really well in all that air space. Makes a cool, lightweight alternative to all my other cabs.

IMG_3466.jpeg


IMG_3467.jpeg
 
Did you try it out before closing off the 2 unused speaker holes. Never tried it myself, but a lot of people seem to like that detuned 412 thing.
 
Did you try it out before closing off the 2 unused speaker holes. Never tried it myself, but a lot of people seem to like that detuned 412 thing.

I tried it both ways with my 1965 cabinet

It sounded better just leaving the speaker holes imo
 
I have 6 other cabs. This one has speaker mounting screws broke off in some of the holes. The entire back panel screws also had to be shifted and re-drilled.

It’s been sitting in a room being used as a cat scratching post. I had 2 new Creambacks sitting in boxes……so why not? I was honestly going to put the cab in my dumpster at work until I decided to do this.
 
  • Like
Reactions: PDC
I discovered the best upgrade to my 1960B when I built my Mojotone Brit 50 Kit. I had the chassis sitting on top of the cab while I was testing it and had a big beach towel over the cab to protect it from the chassis. There was a double layer of beach towel that just happened to be hanging perfectly over the top half of the front of the cab. It sounded incredible. After testing, I put the chassis in the head shell and took the towel off and the head on top and didn't like the tone nearly as much. For a couple of minutes I couldn't figure it out and then it occurred to me to put the towel back on and there it was again. That towel is still there today.
 
How about turning a 2x12 into a 4x12 by converting the back panel into a second baffle board? Now that's thinking inside the box!
 
I have been curious about those Neo Creams. I am in the minority in that I actually prefer the 65 Watt M Creamback to the 75 watt H version. I have heard that the Neos lack a little bit of the midrange body that I like about the standard 65 Watt M version. But I bet giving them the extra space inside the cabinet to flex and move some air brings some of the fullness back. I dig these sort of off the wall experiments!
 
I have 6 other cabs. This one has speaker mounting screws broke off in some of the holes. The entire back panel screws also had to be shifted and re-drilled.

It’s been sitting in a room being used as a cat scratching post. I had 2 new Creambacks sitting in boxes……so why not? I was honestly going to put the cab in my dumpster at work until I decided to do this.
Hey so before you dumpster that cab... I think I'm relatively local to you - I'd be happy to take it off your hands 🤣
 
I discovered the best upgrade to my 1960B when I built my Mojotone Brit 50 Kit. I had the chassis sitting on top of the cab while I was testing it and had a big beach towel over the cab to protect it from the chassis. There was a double layer of beach towel that just happened to be hanging perfectly over the top half of the front of the cab. It sounded incredible. After testing, I put the chassis in the head shell and took the towel off and the head on top and didn't like the tone nearly as much. For a couple of minutes I couldn't figure it out and then it occurred to me to put the towel back on and there it was again. That towel is still there today.
Tone towel.

Patent it and sell it.
 
I have been curious about those Neo Creams. I am in the minority in that I actually prefer the 65 Watt M Creamback to the 75 watt H version. I have heard that the Neos lack a little bit of the midrange body that I like about the standard 65 Watt M version. But I bet giving them the extra space inside the cabinet to flex and move some air brings some of the fullness back. I dig these sort of off the wall experiments!

What's odd is that I don't like the M or H versions. The M was too full in the low mids........especially in a 4x12. The H was kind of the polar opposite, very hard and harsh sounding to me. I found the M usable in some scenarios, but I really hated the H.

I hear people saying the Neos are in the middle. But to my ears, they are entirely their own thing. They have a real tight/snappy poke in the high mids that sounds great with high gain.........but no harshness like the H. These are brand new, so I can see them getting little fuller with some hours on them and start moving more towards an M sound.
 

Similar threads

Back
Top