CAB M and bluetooth = 10 seconds to change a param

  • Thread starter Thread starter philmartins
  • Start date Start date
P

philmartins

New member
Hi,

I use the CAB M between amp and column. I am using the remote app on a Huawei P20 Pro.

Everything is updated correctly (firmware on the CAB M, last android version on the phone).

When changing a parameter on the phone it takes like 10 seconds before I can hear the change ...

I am placed like 5 meters away from the amp (and the CAB M).

Is it normal? Does it work better with iOS?

Thanks for your return.

Cheers,

PHil
 
Hi philmartins,

there are documented issue between Huawei and Bluettoth LE (the open protocole that we use) because of some choices made by Huawei in terms of hardware architecture. We are trying to make it work better but it's a pain, and Huawei doesn't seem to care.

CAB m works perfectly with iOS, yes.
 
okay so no issue with iOS. It works perfectly.

With Android it starts well and then after a while the performance is getting worse ... until the point where I have to wait 8 seconds to hear the change.

When I change on the cab m it is direct but 8 seconds from the phone.

Will stay with iOS for this ...
 
Hi philmartins, it's not Android, it's Huawei. Most of our users actually have android phones and it's perfectly OK.
 
You must log in or register to reply here.
Back
Top