I can’t get my elan mkv to work on my pedal board with my other pedals . Everything has power but no sound .either everything else in my chain works. Or just the elan . Any suggestions !? I’m stumped .
Pull everything else, including cables, off the board but the Elan, then put each piece back on one at a time, and play through your board into your amp after each addition. Could be a bad cable, could be something doesn't like the signal it's seeing, could be something else entirely.
Pull everything else, including cables, off the board but the Elan, then put each piece back on one at a time, and play through your board into your amp after each addition. Could be a bad cable, could be something doesn't like the signal it's seeing, could be something else entirely.
Try hooking up the MK5 and just one other pedal with cables your are certain are good but power the MK5 and the pedal from different power sources so that the MK5 and the pedal are not ultimately sharing the same plug in the wall. Once you've tried that, let us know how it went.
If you can't get any results otherwise, maybe just contact him. Usually these problems come down to power draw, bad cable(s), or placement in a chain, meaning some pedals want to be first, some want to be after dirt, some want to be in the effects loop. Other times, it's just something weird with the pedal itself, like a point of contact not being made when a patch cable is at a particular angle.