J
Everlone":3omtxijs said:So are you going to keep all three? If so, what's your justification?![]()
![]()
![]()
SgtThump":mol8170z said:Everlone":mol8170z said:So are you going to keep all three? If so, what's your justification?![]()
![]()
![]()
LOL! The ONLY justification I can come up with is that I got the Crate and Marshall rigs for cheap. That's about the only excuse I have!
SgtThump":1oygge0d said:metalowns101":1oygge0d said:score dude!
Any chance of sharing some settings and bias settings?![]()
Sure! I bias each tube exactly how Marshall says... I think it's 45mV per tube using a DMM and their bias points on the back of the amp. Some people say that's too hot, but I don't think Marshall would recommend that setting if it wasn't right.
Also, the settings obviously depend on the cab. I'm using my late '70s Marshall slant cab with "Blackback" speakers. I have the "deep" switch on, the bass up around 2:00 o'clock, and the mid/treble/presence down low (under noon.) I'm on mode 1 on the lead channel with the preamp gain around 2:00 o'clock, but that depends on the guitar pickups.
This is just for home, though. I'd probably come up with the mid/treble/presence in a live setting to cut through more and maybe even back off the preamp distortion.
What settings are you using? Stuff that's way different or pretty similar?