Kit guitar #3

  • Thread starter Thread starter BRENTrocks
  • Start date Start date
Well I decided to rob the bridge off off my DC JR….same brand and style. I couldn’t wait until Tuesday. I have this beautiful holiday weekend and I want to finish this project!!!

So…it’s off to work. (I actually have to work today) I have a drill press at work!!! To drill the bridge post holes!!!

Them it’s assembly time!!!!



IMG_2004.jpeg
 
What's going on about an inch up from the point with the black paint on the headstock ? Is that a bubble ? It breaks from the otherwise sharp line.
 
Well, it’s done !

I took it to work with me this morning so that I could use my drill press to drill the bridge holes and my gosh, that worked out so much better than trying to do it by hand with a cordless drill at home!

I was a little off on my neck pitch, the bridge is resting down on the body and that is really where it needs to be. I can’t really go any lower on my action so I probably should’ve increased the neck pitch a little bit to give myself a little bit more adjustability in the bridge height, but in the end, it worked out.

The Fret work on this guitar is absolutely great! I was very very surprised. I expected many high Frets.

Final weight, fully assembled, 6 lbs. 13 oz.

Overall, I am very happy with the build, especially since I only paid $30 for the kit. But I have $40 into painting supplies and I have $60 into a bridge and I have $15 into a Kustom trust rod cover. Lol. And everything else I had in my parts drawer. The pick ups, the tuners the back plate. Lol. And the rest of the electronic stuff and the knobs and the toggle. But I probably should re-order some of that stuff because I used my last toggle and I used my last two 500 K pots.

The tone of this guitar is spectacular! I put a Seymour Duncan George Lynch, screaming Demon in the bridge and I put a Seymour Duncan Seth lover in the neck and it is a great combination in this Guitar!

The playability, could be a little better. The action is not super low, but it is certainly not high by any stretch of the imagination. I wish the neck was a little fatter, but everything lines up correct and the only thing that is slightly off is the neck pitch because I had to lay the bridge right down on top of the body to achieve what I would consider a playable action.

I’m real happy with the finish work. I’m really glad that I did the HOUSE FIRE BURST! I’m really happy with how it turned out after it has a couple coats of polyurethane on it and I’m glad that I put the stinger on the back, I can’t remember who suggested for me to put a stinger on it but, thank you for that person. Whoever said that!

For $150, it’s a really nice guitar and it was a very fun project! I love doing this kind of stuff in my spare time! I’m sure that there will be more kit Guitars in my future, but probably not right away I’ve got a show more love for my other Guitars too. You know?


IMG_2005.jpeg
IMG_2007.jpeg
IMG_2013.jpeg
IMG_2014.jpeg
IMG_2015.jpeg
IMG_2016.jpeg
IMG_2017.jpeg
IMG_2018.jpeg
IMG_2019.jpeg
 
I think it’s just a spot where the tape didn’t quite stick all the way. And the volute
Came out pretty nice! You had me checking out a couple kits for sale as a result of your recent creations, lol.

I found the common blue Lowes/Home Depot painters tape is prone to failing in spots when masking more radical contours and curves. If I'm doing something like that I usually reach for 3-M vinyl tape, which is designed to curve and stretch. It's stuff you use for custom automotive or motorcycle paint jobs. The edges adhere better when you deviate aggressively from straight lines and it's much more workable, but does cost more. You can even get very narrow widths for extra fine work. Pro-tip from an auto body repair dropout.
 
Came out pretty nice! You had me checking out a couple kits for sale as a result of your recent creations, lol.

I found the common blue Lowes/Home Depot painters tape is prone to failing in spots when masking more radical contours and curves. If I'm doing something like that I usually reach for 3-M vinyl tape, which is designed to curve and stretch. It's stuff you use for custom automotive or motorcycle paint jobs. The edges adhere better when you deviate aggressively from straight lines and it's much more workable, but does cost more. You can even get very narrow widths for extra fine work. Pro-tip from an auto body repair dropout.
thanks bro!!!!

when i did my EVH Frankiie replica (Kramer focus 1000) i went to the auto parts store and got some 3M stuff in different thicknesses....it worked great!!!!


7df66591-0757-4c8b-a595-30af88e52728.jpg
8a2d047c-8de4-4322-8178-f4cbf7e10256.jpg
 
Back
Top