scottosan
Well-known member
You can get these in the US, but they’re much cheaper here. What I’m about to show you is the One Control Chamaeleo MKIi. There is a MkIII out which goes for about $350 plus another $30 for a power supply. Here in Japan, the unit is considerably cheaper at $200.
If you’ve heard of Mad Professor Pedals, that’s who designs most of One Control product line. Björn Juhl is the guy. One Control is a Japanese company that manufactured his designs.
This is one of the lower tier switchers but it is already packed with features.
- Programmable 5 loop switcher
- Choose between buffeted or buffered input
- Also serves as a power distribution
- Can support 4CM and simple amp channel switching. 1) can run all 5 loops into front of amp. 2) there’s interupt jacks between loops 4 and 5 which allow you to run loops 1-4 into the front and loop 5 in the FX loop. 3) you can sacrifice loop 5 and use it to switch you amp channels. 4) in my case I wanted to switch my amp and switch FX in my loop. I did the buy sacrificing another loop to use as an interupt for the 4CM. So loops 1 and 2 are for the front of the amp, loop 3 is used for my dedicated interrupt for the 4CM. Loop 4 is my FX loop and loop 5 switched my channels. It’s confusing because of the versatility.
- it also had a mute switch that sends to a tune. You only need a single cable for this because the tuner is not inline.
Made a little video. Still confusing but I can answer any questions. This is the Chamaeleo with a chorus and delay pedal I built. Goes into my ToneNerd Modded Marshall. Played with my roasted pine Jazzmaster inspired build and ToneNerd A2 P90s.
If you’ve heard of Mad Professor Pedals, that’s who designs most of One Control product line. Björn Juhl is the guy. One Control is a Japanese company that manufactured his designs.
This is one of the lower tier switchers but it is already packed with features.
- Programmable 5 loop switcher
- Choose between buffeted or buffered input
- Also serves as a power distribution
- Can support 4CM and simple amp channel switching. 1) can run all 5 loops into front of amp. 2) there’s interupt jacks between loops 4 and 5 which allow you to run loops 1-4 into the front and loop 5 in the FX loop. 3) you can sacrifice loop 5 and use it to switch you amp channels. 4) in my case I wanted to switch my amp and switch FX in my loop. I did the buy sacrificing another loop to use as an interupt for the 4CM. So loops 1 and 2 are for the front of the amp, loop 3 is used for my dedicated interrupt for the 4CM. Loop 4 is my FX loop and loop 5 switched my channels. It’s confusing because of the versatility.
- it also had a mute switch that sends to a tune. You only need a single cable for this because the tuner is not inline.
Made a little video. Still confusing but I can answer any questions. This is the Chamaeleo with a chorus and delay pedal I built. Goes into my ToneNerd Modded Marshall. Played with my roasted pine Jazzmaster inspired build and ToneNerd A2 P90s.
