Music&Chaos
Well-known member
This has me intrigued. If I had any cash, these would be my next acquisition for testing. You think it can do well at all, one, or none? Time will tell.
https://www.stewmac.com/new/seymour...utm_medium=email&attn_lid=23&externalId=mTNOn
Description:
In the past, if you wanted humbucker tone, P90 tone, and Strat tone, you would have needed three different guitars. But now, the P-Rails humbucker delivers all three sounds in a pickup that is a drop-in replacement for any standard-sized humbucker slot. Using any 3-way (on-off-on) mini-switch, each unique hybrid humbucker can be split to give you a super fat, authentic vintage P90, or be split to the Rail coil for a classic Strat-like tone.
With both coils on, you get a big-sounding humbucker that packs a nice full punch. The neck version is wound RWRP so that, you can use both P90s or both Rails together and achieve hum-canceling operation. Hand built in Santa Barbara, CA, each P-Rails versatile humbucker pickup uses a pair of alnico 5 bar magnets, comes with a 4-conductor lead wire to allow for all the wiring options, and is vacuum wax potted for squeal free operation.
https://www.stewmac.com/new/seymour...utm_medium=email&attn_lid=23&externalId=mTNOn
Description:
Seymour Duncan SHPR-1S P-Rails
Truly unique and versatile humbucker pickups that combine a Hot Rails coil with our Vintage P90 to give you unmatched tonal variety.In the past, if you wanted humbucker tone, P90 tone, and Strat tone, you would have needed three different guitars. But now, the P-Rails humbucker delivers all three sounds in a pickup that is a drop-in replacement for any standard-sized humbucker slot. Using any 3-way (on-off-on) mini-switch, each unique hybrid humbucker can be split to give you a super fat, authentic vintage P90, or be split to the Rail coil for a classic Strat-like tone.
With both coils on, you get a big-sounding humbucker that packs a nice full punch. The neck version is wound RWRP so that, you can use both P90s or both Rails together and achieve hum-canceling operation. Hand built in Santa Barbara, CA, each P-Rails versatile humbucker pickup uses a pair of alnico 5 bar magnets, comes with a 4-conductor lead wire to allow for all the wiring options, and is vacuum wax potted for squeal free operation.
