stratotone
Active member
We've been talking about wet/dry/wet setups here, this is my W/D rig.
Just wired the stuff up tonight and shot a really quick/dirty video of it. The ceriatone wreck clone is VERY sensitive to changes in picking, volume knob and pickups... it's like driving an old muscle car and a totally different experience than a modern channel switcher like my bogners. No tab was used, I was just dicking around - couple of VH riffs and some wheedly wheedly stuff.
signal path:
PRS into Trainwreck clone into THD hotplate into Marshall V30 cab - line out from hotplate into TC Electronics Nova Repeater into VHT 2/90/2 into V30 cab. Mic used - camcorder mic on cheapo cam that uses flash cards instead of a HD.
All different tones were done at the guitar, didn't touch the settings on the amp. If I can do a volume boost for leads easily, this may be my live rig... well, with one 4x12 split... I can't carry 2 4x12s in my car.
signal path:
PRS into Trainwreck clone into THD hotplate into Marshall V30 cab - line out from hotplate into TC Electronics Nova Repeater into VHT 2/90/2 into V30 cab. Mic used - camcorder mic on cheapo cam that uses flash cards instead of a HD.
All different tones were done at the guitar, didn't touch the settings on the amp. If I can do a volume boost for leads easily, this may be my live rig... well, with one 4x12 split... I can't carry 2 4x12s in my car.