James Lugo
Active member
I had it retubed today and then it started crapping out. It started turning off and on and then the lights started blinking.
What's up?
What's up?
Ventura
Well-known member
All blinking at the same time?? Either a mute or MIDI command issue.
Mo
Mo
slyvren
Member
Hey James.
Your midi controller chip might have gotten zapped by a bad tube or a spike, but that's just a guess based on stuff I've read here. I'd send an email Peter if you haven't already. He should be able to get you all fixed up.
Your midi controller chip might have gotten zapped by a bad tube or a spike, but that's just a guess based on stuff I've read here. I'd send an email Peter if you haven't already. He should be able to get you all fixed up.
G
guitarobert
Member
Sounds like the MIDI chip or board. Does it happen every time you turn it on or just once? Happened to me once but turning the power off/on and disconnecting/reconnecting power fixed it. Never happened again since.
If it happens every time then it sounds like something happened to the midi chip or midi board. Just a guess though. Peter knows best.
If it happens every time then it sounds like something happened to the midi chip or midi board. Just a guess though. Peter knows best.
Peter Diezel
Well-known member
James Lugo":1aiw95a6 said:
Please send me an email with Your serial number,
Your address and phone number.
Thanks,
Peter
James Lugo
Active member
Peter I realize now I should have sent you an email in the first place but I was so freaked out last night thinking the guy who biased the amp f'd it up. I've had it 3 years with no issues, the amp has always been perfect I will get you the s/n. thanks
Peter Diezel
Well-known member
Please no concerns James.
The conrtoller was maybe damaged by a
high voltage spike from a bad power tube.
We have different controllers:
Till 2005 we had the AT89S8252.
Then the maufacture stopped production
and released the AT89S5253.
Please let me know which type is inside.
The difference is that the old one has
two 33pF caps located on the oscillator quartz
and the new one is running with 2 x 4,7pF caps.
I easily can send You the controller, new caps and/or a
complete midi board.
Cheers,
Peter
The conrtoller was maybe damaged by a
high voltage spike from a bad power tube.
We have different controllers:
Till 2005 we had the AT89S8252.
Then the maufacture stopped production
and released the AT89S5253.
Please let me know which type is inside.
The difference is that the old one has
two 33pF caps located on the oscillator quartz
and the new one is running with 2 x 4,7pF caps.
I easily can send You the controller, new caps and/or a
complete midi board.
Cheers,
Peter
R
Rødskjegg
New member
That's some customer service! Man, I'm proud to be a Herbert owner.
James Lugo
Active member
Rødskjegg":3rvxu9x4 said:
Yeah. Wow. Peter is a good man.
PaulyPanacea
Active member
Papa never ceases to amaze us & take care of his kiddies!!! 
James Lugo
Active member
I know, problem solved. What a great company. The company I got the tubes from said they will replace any bad tubes too. All is good in Lugoland! 
Peter Diezel
Well-known member
Ventura
Well-known member
MEGA 
James Lugo
Active member
The tech went through it and it was a couple of bad tubes that were the issue. He emailed me yesterday and couldn't believe how great the amp sounds.