supersonic":3auiss60 said:
_actual time_":3auiss60 said:
supersonic":3auiss60 said:
...what helped me eq it was to set up my SLO 100 and XTC with a "Headbone Switcher". I managed to dial the XTC nice and bright where it cuts nicely in a band situation.
could you post a pic or something of your settings?

i've modded my XTC for more brightness, but i'm always curious how other folks are dialing them in.
Mine is a 100B. I set the pre EQ to the brightest position, trebble 1:00, mid 1:00, bass 12:00 (depending on guitar) presence at about 10:00. Not sure of your model but I set the excurtion switch to the middle position. Rear panel is set to "Modern".
I'd have to try those settings, but technically, that's dialed even darker than what I usually do
B2 sounds terribly ice-picky, unless you totally crank the gain (I use B1... N is muffled)
L excursion is way too boomy (I use T)... middle position on a 100B appears to be M
Presence is closer to 1-2 o'clock on mine
That's my third Ecstasy model, so it's not particular to the one I own now
As far as speakers go... V30s, Creambacks M, Creambacks H, G12-65, G12H(55) to name a few, I've tried a bunch of them
Blanket still in effect