Ola

[glpg80]

Congrats on your Dar Forza endorsement dude, thats fucking awsome

 

[Ola Englund]

thanks mang! I'm very happy with how everything turned out. Now I'm excited getting the new amp so expect some awesome demos when I get it! Also waiting for my chair endorsement from the chair-company that promised me the most comfortable designed chair they had. Nothing yet though

 

[glpg80]

dibs on the chair

thats awsome man, cant wait for all of the videos. most of the demo's that exist dont show how the 6C33 tubes react to different speakers. maybe with the impulses you use you can change that a bit?

 

[CaseyCor]

Wow, congrats man! I've been GASing for a DAR for a few weeks.

You deserve it mate.

 

[degenaro]

dibs on the chair

thats awsome man, cant wait for all of the videos. most of the demo's that exist dont show how the 6C33 tubes react to different speakers. maybe with the impulses you use you can change that a bit?

Theoretically since impulses deal with a line-out signal that is unlikely to happen if I had to put my money where my mouth is.

 

[glpg80]

dibs on the chair

thats awsome man, cant wait for all of the videos. most of the demo's that exist dont show how the 6C33 tubes react to different speakers. maybe with the impulses you use you can change that a bit?

Theoretically since impulses deal with a line-out signal that is unlikely to happen if I had to put my money where my mouth is.

you wouldnt hear a difference? i thought impulses were created from real speakers?

 

[Anonymous]

Damn... couldnt have happened to a nicer, more well deserving guy! Cheers Ola!!!

 

[Ola Englund]

thx guys!

 

[Motorpud]

Congrats

 

[Les Zombie]

Thats cool ola.

 

[fearhk213]

dibs on the chair

thats awsome man, cant wait for all of the videos. most of the demo's that exist dont show how the 6C33 tubes react to different speakers. maybe with the impulses you use you can change that a bit?

Theoretically since impulses deal with a line-out signal that is unlikely to happen if I had to put my money where my mouth is.

you wouldnt hear a difference? i thought impulses were created from real speakers?

You're right. They are created from real speakers, but you also have to take into account the power section used when making the impulse. It seems more often than not, impulses are made with a tube power section from a guitar amp. I don't this type of impulse will serve your purpose because unless Dar's new impulse stuff utilizes a 6C33 power section, I doubt there are any other impulses floating around that were created with 6C33's. And even if you had an amp with 6C33's and decided to take a line tap from between the head & cab to get the 6C33 tone in the mix, you'd still be blending it with the other tube section from the impulse so it wouldn't be an accurate representation of 6C33's.

The only other way I know of is to get impulses made with clean solid state power sections. Then if you have an amp with 6C33's you can use a line out from between the head & cab (to get the power amp tone in there) & sent that to the impulse. Outside of an impulse being made with a 6C33 power section, this would be your best bet. Only problem I see is it seems most impulses (I've seen) are made using a tube power amp. There could be some free ones floating around, but the only commercial ss power section ones I'm aware of is the Red Wirez stuff.

 

[Gsxrbusa]

The dude could be endorsed by Gorilla and make it sound like a million bucks.

It is cool that it is with an up and comer though.

 

[Inca Roads]

NICE Ola!!!!
I was pumping your ESP Eclipse Aged/Engl Savage
video on here, before you were even a forum member.
I LOVE that song and I want to request, that you video
record that song with your new DAR.
That will sound SICK!!!!
Congrats Ola on your new endorsement.
Rick

 

[glpg80]

dibs on the chair

thats awsome man, cant wait for all of the videos. most of the demo's that exist dont show how the 6C33 tubes react to different speakers. maybe with the impulses you use you can change that a bit?

Theoretically since impulses deal with a line-out signal that is unlikely to happen if I had to put my money where my mouth is.

you wouldnt hear a difference? i thought impulses were created from real speakers?

You're right. They are created from real speakers, but you also have to take into account the power section used when making the impulse. It seems more often than not, impulses are made with a tube power section from a guitar amp. I don't this type of impulse will serve your purpose because unless Dar's new impulse stuff utilizes a 6C33 power section, I doubt there are any other impulses floating around that were created with 6C33's. And even if you had an amp with 6C33's and decided to take a line tap from between the head & cab to get the 6C33 tone in the mix, you'd still be blending it with the other tube section from the impulse so it wouldn't be an accurate representation of 6C33's.

The only other way I know of is to get impulses made with clean solid state power sections. Then if you have an amp with 6C33's you can use a line out from between the head & cab (to get the power amp tone in there) & sent that to the impulse. Outside of an impulse being made with a 6C33 power section, this would be your best bet. Only problem I see is it seems most impulses (I've seen) are made using a tube power amp. There could be some free ones floating around, but the only commercial ss power section ones I'm aware of is the Red Wirez stuff.

the reason i mentioned this was Ola was trying recabinet 3 which he likes pretty well - and using the slave method - he has a hotplate. he mentioned he liked recabinet pretty well. hence why i said my comment in the manner i did.

i thought it was possible using this method. not a problem if it cant/can be done. seems as though with the 6C33 tubes used it creates a blank knowledge area of not really knowing how they react to different speakers.

 

[fearhk213]

dibs on the chair

thats awsome man, cant wait for all of the videos. most of the demo's that exist dont show how the 6C33 tubes react to different speakers. maybe with the impulses you use you can change that a bit?

Theoretically since impulses deal with a line-out signal that is unlikely to happen if I had to put my money where my mouth is.

you wouldnt hear a difference? i thought impulses were created from real speakers?

You're right. They are created from real speakers, but you also have to take into account the power section used when making the impulse. It seems more often than not, impulses are made with a tube power section from a guitar amp. I don't this type of impulse will serve your purpose because unless Dar's new impulse stuff utilizes a 6C33 power section, I doubt there are any other impulses floating around that were created with 6C33's. And even if you had an amp with 6C33's and decided to take a line tap from between the head & cab to get the 6C33 tone in the mix, you'd still be blending it with the other tube section from the impulse so it wouldn't be an accurate representation of 6C33's.

The only other way I know of is to get impulses made with clean solid state power sections. Then if you have an amp with 6C33's you can use a line out from between the head & cab (to get the power amp tone in there) & sent that to the impulse. Outside of an impulse being made with a 6C33 power section, this would be your best bet. Only problem I see is it seems most impulses (I've seen) are made using a tube power amp. There could be some free ones floating around, but the only commercial ss power section ones I'm aware of is the Red Wirez stuff.

the reason i mentioned this was Ola was trying recabinet 3 which he likes pretty well - and using the slave method - he has a hotplate. he mentioned he liked recabinet pretty well. hence why i said my comment in the manner i did.

i thought it was possible using this method. not a problem if it cant/can be done. seems as though with the 6C33 tubes used it creates a blank knowledge area of not really knowing how they react to different speakers.

You can do it that way no doubt. I've done it that way with great results as have many, many others. It's just if you're wanting to specifically find out how 6C33's react to different speakers by using an impulse you have to lose all the additional variables. Using an impulse created with say an EL34 or 6L6 power section is a pretty big variable. Again, not that it can't sound killer, but it won't give you an accurate representation of how 6C33 react to different speakers since you'll have the other tube power section doing it's thing. The only ways I can think of are by using...

-Impulses created using a 6C33 power section & using the preamp/fx loop out of your amp
-Impulses created using a neutral SS power section & using an amp with 6C33 power tubes & using a line out that includes the power section

 

[Ventura]

Congrats Brethren!! Well deserved...

Now, most importantly, with the chair endorsement, are we looking at something with hinged arm rests? Leather or high quality mesh? Let me know... I'm a chair kinda guy

Peace,
V.

 

[glpg80]

Congrats Brethren!! Well deserved...

Now, most importantly, with the chair endorsement, are we looking at something with hinged arm rests? Leather or high quality mesh? Let me know... I'm a chair kinda guy

Peace,
V.

i called dibs on the chair, but might be willing to work a deal with your mesh velcro plus cash

 

[Ola Englund]

NICE Ola!!!!
I was pumping your ESP Eclipse Aged/Engl Savage
video on here, before you were even a forum member.
I LOVE that song and I want to request, that you video
record that song with your new DAR.
That will sound SICK!!!!
Congrats Ola on your new endorsement.
Rick

You my friend have been reading my mind... that was the song I was planning to do as soon as I get my amp

Thanks bro!

 

[Ola Englund]

dibs on the chair

thats awsome man, cant wait for all of the videos. most of the demo's that exist dont show how the 6C33 tubes react to different speakers. maybe with the impulses you use you can change that a bit?

Theoretically since impulses deal with a line-out signal that is unlikely to happen if I had to put my money where my mouth is.

you wouldnt hear a difference? i thought impulses were created from real speakers?

You're right. They are created from real speakers, but you also have to take into account the power section used when making the impulse. It seems more often than not, impulses are made with a tube power section from a guitar amp. I don't this type of impulse will serve your purpose because unless Dar's new impulse stuff utilizes a 6C33 power section, I doubt there are any other impulses floating around that were created with 6C33's. And even if you had an amp with 6C33's and decided to take a line tap from between the head & cab to get the 6C33 tone in the mix, you'd still be blending it with the other tube section from the impulse so it wouldn't be an accurate representation of 6C33's.

The only other way I know of is to get impulses made with clean solid state power sections. Then if you have an amp with 6C33's you can use a line out from between the head & cab (to get the power amp tone in there) & sent that to the impulse. Outside of an impulse being made with a 6C33 power section, this would be your best bet. Only problem I see is it seems most impulses (I've seen) are made using a tube power amp. There could be some free ones floating around, but the only commercial ss power section ones I'm aware of is the Red Wirez stuff.

the reason i mentioned this was Ola was trying recabinet 3 which he likes pretty well - and using the slave method - he has a hotplate. he mentioned he liked recabinet pretty well. hence why i said my comment in the manner i did.

i thought it was possible using this method. not a problem if it cant/can be done. seems as though with the 6C33 tubes used it creates a blank knowledge area of not really knowing how they react to different speakers.

Just a correction, I haven't been using a hotplate since the video where I actually used a Hotplate(and it read so in the title).. I sold it just a week after or something(this was 2009 I think)

Recabinet is an awesome product and I fully support Shane(Kazrog) for making the software, but I wouldn't use it for pro-use when I have the possibility to record a real amp. But for home recording Recabinet is the way to go.

 

[degenaro]

dibs on the chair

thats awsome man, cant wait for all of the videos. most of the demo's that exist dont show how the 6C33 tubes react to different speakers. maybe with the impulses you use you can change that a bit?

Theoretically since impulses deal with a line-out signal that is unlikely to happen if I had to put my money where my mouth is.

you wouldnt hear a difference? i thought impulses were created from real speakers?

Well it doesn't matter though, because in the end an impulse is an EQ curve, whereas the way an amp reacts to different speaker is because there is an electrical interaction which is gone with impulses. The only interaction there is line-out signal to recording interface input/mic pre.
The amp (output transformer) to load (speaker) interaction is out of the picture there.