delay spillover

[spiritledd]

using a RJM Mastermind GT and Rack Gizmo ...and Eventide Time factor ...how can i get delay spillover? ...gonna have to buy something?

 

[~Abstract~]

http://www.eventide.com/~/media/Files/A ... 41131.ashx


Page 16

 

[voodooradio1]

using a RJM Mastermind GT and Rack Gizmo ...and Eventide Time factor ...how can i get delay spillover? ...gonna have to buy something?

If you are using it in one of the loops on the Gizmo, I don't think you will be able to get spill over. I used a timeline with my last switching system (Voodoo Lab), and was able to get spill over by placing it in the signal chain outside of the looper, and controlling it via midi, which allowed me to include it in any preset I built. You should be able to do the same with the stuff you have.

 

[spiritledd]

thanks guys ...i found just include timefactor in loop but turn mix all the way down and store ...then then when I go back to rhythm preset my solo delays trails will spillover ...and voodooradio1, leaving it outside of loops??? ...doh!!! ...why didn't i think of that he he

 

[voodooradio1]

Don't feel too bad. It took a while for the light bulb to come on for me too. By the time I got all of my cables built and routed, I wasn't seeing the easy solution.

 

[spiritledd]

I know what you mean voodooradio1, thanks

 

[ThrowBackMan]

Does anyone make a simple stomp box delay with spill over one could use in the effects loop of the amp? I thought boss did or something, but I can't remember..
Thanks

 

[Wayniac3]

Not stomp box, but I do know that the rocktron Intellifex Ltd had spillover, delay "ducking" (didn't add delay during a fast passage until the note length dictated a delay), and has a built in noise gate. The choruses are pretty lush too...

 

[ThrowBackMan]

Thanks much!

 

[~Abstract~]

Tc flashback and Strymon makes a few too.

 

[spiritledd]

thinking best way, is keeping both Eventides Time and Mod Factors out of Rack Gizmo's loop by-passes ...problem is,then no "instant access" on function with MIDI controller ...but, I can store an effect configuration for each preset, I that I would want to access delay or modulation on, by just storing main mix off, then just use expression pedals to turn mix on ...think it is the smartest way to go, since for me, I just want a little extra effects during rhythm when I do short lead fills within rhythm, so expression pedal is way better suited for task anyways, rather than using momentary switching

 

[spiritledd]

I am pondering on how to go about sharing "post" MIDI EQ in two different amps series loops ...right now it is only in RM 100 loop ...I guess a splitter at in/out's of EQ? ...unless I run into ground loop ...using all three of my ebtech isolators already, so have to get another one ...I also forgot I cant send Rockman signal to all amps thru line mixer like I was planning, because I forgot I have to bring gain down on amp to 1/4th in order for Rockman to work ...so I will have to stay with one dedicated amp for Rockman ...I can still send my 2 other preamps at same time though thru line mixer, to that amp, so it is not just Rockman by it self ...that way I still get my harmonic feedback Rockman provides, but still have the beef as well for that amp and speakers ...other thing is,...because of using Rockman, my ears get acclimated to a lot of mids ...when I go back to rhythm ...it sounds all bass and treble ...so I added a little more mid than I normally use on rhythm to balance out my tones ...and also using power dimension on my other Valvestate rhythm amp in "out position" which makes for more mids as well

 

[spiritledd]

curious to find out if when mixing different tones with line mixer if one source will cancel the others feedback/sustain out?

 

[Lord Toneking]

Does anyone make a simple stomp box delay with spill over one could use in the effects loop of the amp? I thought boss did or something, but I can't remember..
Thanks

My Flashback and Hardwire DL-8 both do spill over